Preparing, Cutting TT450 top and tail machine Ideal for use in automated lettuce processing with a low personnel requirement – the top and tail machine is designed for automatically cutting the stalk and leaf tips of frisée, endive and romaine lettuce

Your benefits Product groups Perfect and consistent cutting quality at high processing speeds High yield with minimal waste thanks to optimized cutting technology Low personnel requirement: only 2 people are needed to operate the machine Easy operation and cleaning thanks to good accessibility Portrait Precise and consistent cutting quality with versatile processing options The TT450 is designed for professional use in the preparation area of automated lettuce processing. The TT450 is a top and tail machine for automatically trimming the stalk and leaf tips of frisée, endive and romaine lettuce...

The machine is characterized by its intelligent operation, which is also very simple and safe: The lettuces are transported to the cutting unit via a chain-based infeed belt and held in an optimal cutting position by gentle hold-down technology. In the infeed area, an adjustable product guide plate, positioned at an angle to the cutting point, is installed to ensure that each product is cut to the same length on the stalk side. The product infeed speed is adjustable and can therefore be adapted to meet customer requirements. The position of the knives can be adjusted to optimally adjust the yield...

Benefits High productivity – minimal The TT450 enables a considerable increase The robust stainless steel construction makes the TT450 ideal for long, low- compared to manual processing, as well as achieving an improved yield of up to 6 % at The entire system, including the conveyor the same time. The TT450 impresses users belt, is easily accessible for service work and with its high processing capacity of up to 30 cleaning. All covers are easy to open and a heads of lettuce per minute and per safety check is carried out: the machine stops when the covers are open. Simple operation and easily...

Cutting thickness The data indicated are standard information. In addition, adaptation to other supply networks (e.g. 230V/60 Hz) is optionally possible (except for manual and pneumatic machines). Subject to changes.