GS 10-2 TTS belt cutting machine This multifunctional machine has sensor technology and a PLC control for maximum waste reduction and cuts an extremely wide variety of food products effectively, precisely and gently.

GS 10-2 TTS belt cutting machine Your benefits Product groups Maximum waste avoidance by means of sensor technology and a PLC control Cost-effective due to a reduced personnel requirement and an affordable purchase price High output with precise and consistent cutting quality Easy operation and cleaning – knives can be changed with no tools required Highly flexible due to a large selection of cutting tools for different products and cutting types Compact design for a low space requirement – for use as a stand-alone unit or for integration into a processing line Portrait Maximum waste reduction...

GS 10-2 TTS belt cutting machine processing parameters are set. The knife is controlled by a servo motor and only begins to rotate when the product arrives at the end of the infeed belt and is ready for the first cut to be made. The GS10-2 TTS calculates the length of the product and the necessary number of cuts required to cut the exact number of slices or segments in the desired cutting thickness. This results in the maximum possible yield of good product from the raw product, with almost no waste. The TTS function can also be used to cut off the ends of a product (top and tail function), for...

GS 10-2 TTS belt cutting machine Benefits Extended infeed belt Optimized hold-down technology and product guidance The belt extension enables several people to charge the infeed belt at the same time, The infeed belt with its perfectly designed which considerably increases the capacity. hold-down technology ensures accurate yet The belt extension is usually combined with gentle product guidance and thus allows the highest possible level of cutting quality to be achieved. The knife box with its optimized product ejection additionally ensures that the cut product remains undamaged during removal...

GS 10-2 TTS belt cutting machine Modern hygienic design Easy cleaning and maintenance The inclined drainage slopes on all sides of The machine can be cleaned by means of a the machine housing ensure that the water water jet. All machine parts such as knives, is ideally drained off after cleaning. The guides, belts and belt tensioners can be machine, including its cutting disks, is quickly removed for cleaning with no tools manufactured completely from AISI 304 required. Furthermore, the machine has a stainless steel and is therefore particularly robust and hygienic. All components that designed...