Catalog excerpts
KRONE KCS separator filters are used for filtering out all particles and solids of any type of liquid medium by mechanical centrifugal filtration. 3.1. Certificate, DGRL / TÜV, GL, LS, DNV, ABS, TR TF / TR CU Certificates (EAC), ASME U-Stamp Notice: The compatibility between medium and vessel or sealing material is the responsibility of the operator. The design of the pressure vessel is based on a quasi-static operation (load cycle number ≤ 1000 according to AD 2000 Merkblatt S1, section 1.4). Max. Differential pressure inlet outlet 2 bar.
Open the catalog to page 1General features • • • • • • Flow rate: 1–5,600 m3/h (special versions on request) Maximum working pressure: 10 bars Maximum pressure drop: 0.2 bar Filter capacity: 40–70 microns Maximal permissible particle size: 1 cm (DN dependent) Maximum wall thickness: 6 mm (in accordance with international standards) ᕡ The entire body can be manufactured of carbon steel, stainless steel 304 or stainless steel 316. If carbon steel is used the outside of the body is provided with an epoxy paint finish to prevent aging due to weather influences. Krone separators are designed for continuous operation...
Open the catalog to page 2Optional accessories available Some applications • Automatic flushing system: 220 V / 24 V for each programmable electric switch panel with which the intervals between flushing cycles and the duration are controlled by an electrically actuated ball valve. Because flush-out of the suspended solids is automatic, no personnel are required. Models with pneumatically actuated devices are also available. Water Deep wells, surface water, lakes, rivers, salt water, fire protection systems for oil jetties / refineries, pre-filters for injection water for oil production. • Inspection cover: Allows...
Open the catalog to page 3Capacity diagram Nominal diameter Tread Tread Tread Tread Tread Tread Tread Flange Flange Flange Flange Flange Flange Flange Flange Flange KCS with threaded connection Capacity: 1-65 m3/h Inlet / outlet: 3/4-3" BSP thread Material: Carbon steel (outside with epoxy paint finish), stainless steel 304 /316 Inlet /outlet: DN 100-500 DIN flanges Material: Carbon steel (outside with epoxy paint finish), stainless steel 304/316 Nominal A B C D E/ F G Sizes to DN 500 available on request.
Open the catalog to page 4Types & technical data25 ° profile type separator KCS with flanges KCS with flanges Capacity: Inlet / outlet: Material: Standard: Capacity: Inlet / outlet: Material: Standard: 65-2.000 m3/h DN 100-500 DIN flanges Carbon steel (exterior with epoxy paint finish), stainless steel 304 oder 316 25° version 1 inspection opening in the lower chamber 65-2.000 m3/h DN 100-500 DIN flanges Carbon steel (exterior with epoxy paint finish), stainless steel 304 oder 316 25° version 1 inspection opening in the lowerchamber, detachable hood for inspection purposes
Open the catalog to page 5Krone Filter Solutions GmbH Industriestrasse 19 | 28876 Oyten / Germany Phone +49 42 07 9 87 69-0 | Fax +49 42 07 9 87 69-27 filter@krone-filter.com | www.krone-filter.com www.shop.krone-filter.com 01.2019 © by Krone Filter Solutions GmbH, subject to change.
Open the catalog to page 6All Krone Filter Solutions GmbH catalogs and technical brochures
-
automatic Filter
20 Pages
-
Overview of our Filter Types
1 Pages
-
KMF
12 Pages
-
KRF
18 Pages
-
KSF
14 Pages
-
KWF
6 Pages
-
DP-MAG
4 Pages
-
KBF-M
6 Pages
-
KDF-V
12 Pages
-
KDF-K
14 Pages
-
KAF Bernoulli
14 Pages
-
KBF
6 Pages
-
KRONE FILTER PRODUCT RANGE
1 Pages
-
KDF-K
6 Pages
-
KBF
3 Pages
-
KAF Bernoulli Filter
8 Pages
-
KAF Bernoulli
4 Pages