Water & Wastewater
44Pages

{{requestButtons}}

Catalog excerpts

Water & Wastewater - 1

Intelligent solutions for the water and wastewater industry

Open the catalog to page 1
Water & Wastewater - 3

The allure of water – a KROHNE world From space, our earth is a blue planet with seemingly vast water resources. However, only 2.5 % of this water is usable fresh water. At the same time, the increase in global population and rapid industrialization put enormous demands on the natural water resources. Water is becoming rare in the future. Against this backdrop, it is clear how important it is to man and industry to have an efficient, high-capacity potable water supply and to have eco-friendly wastewater treatment for the planet as well as for thew development of entire regions. At the same...

Open the catalog to page 3
Water & Wastewater - 4

KROHNE – 90 years of experience and know-how in the water and wastewater industry 1921 Company founded as LUDWIG KROHNE & SOHN in Duisburg, Germany, production of variable area flowmeters for measuring the flow of air, gases and liquids 1955 The beginning of manufacturing mechanical level indicators for measuring liquids in tanks and containers 1961 The first electromagnetic flowmeter (EMF) for water, wastewater, sludge, etc. 1972 The first EMF with pulsed direct current field excitation/automatic zero point offset for the water and wastewater industry 1978 The first ultrasonic flowmeter...

Open the catalog to page 4
Water & Wastewater - 5

1983 The first microprocessor-based electronics for costoptimized manufacturing of EMFs for the water and wastewater industry 1986 The first EMF with capacitative pickup and without contacting the measuring electrodes with the medium for measuring such things as aliphatic sludges 1990 The first radar level meter (FMCW – microwaves) for process tanks and digestion towers 1994 The first straight tube Coriolis device for determining mass flow rate and density of polymers, methanol, activated carbon, sludge, etc. 1996 The first electromagnetic flowmeter with integrated capacitive level...

Open the catalog to page 5
Water & Wastewater - 8

The Haltern waterworks – Responsible for the Rhine, Ruhr and Münsterland Water catchment Water treatment Pretreatment Aereatation/ Degassing Dosage Level Pressure Flow Conductivity Ultra-violet Infiltration Flocculation/ Sedimentation Flow Pressure

Open the catalog to page 8
Water & Wastewater - 9

The waterworks in the Westphalian town of Haltern am See is one of a total of 13 waterworks run by Gelsenwasser AG, one of the largest providers of potable water in Germany. With an annual delivery of around 105 million m3 of water, it ranks among the largest of its kind in Europe. The service area includes more than 20 communities of the northern Ruhr district and Münsterland. A total of a million people, including commerce and industry are reliably supplied with potable water and service water by the waterworks. 24 hours a day, 365 days a year. The Haltern waterworks is situated in a...

Open the catalog to page 9
Water & Wastewater - 10

Well house The well house – 100 % certainty, thanks to 3x100%-diagnostics The untreated water is abstracted in the waterworks via groundwater wells or bank filtration wells and from dams and other types of surface water. A large number of waterworks have decided on the OPTIFLUX electromagnetic flowmeter for monitoring the delivery rate into the well houses. And for good reason: because, compared to conventional mechanical Waltman meters, OPTIFLUX offers key advantages. There is the significantly lower pressure loss, for example, which has a positive effect on the power consumption of the...

Open the catalog to page 10
Water & Wastewater - 11

The pressure filter system – The heart of water treatment The quality of untreated water can vary widely in nature, depending on the extraction point. Therefore around one third of the entire amount of ground filtrate in the waterworks is conducted through a total of nine pressure filter tanks filled with quartz chips for the biological filtering out of manganese. This is where the core process of water treatment takes place. Because, in addition to flocculation, this is where the decision is made as to which suspended particles and colloids are filtered out of the untreated water and in...

Open the catalog to page 11
Water & Wastewater - 12

Booster pump facility Booster pump works with collector well – Everything under control Maximum system availability is indispensable for a waterworks – whether during water abstraction, water treatment or transport. In the Haltern waterworks, a total of 16 rotary pumps with electric drives take on the task of supplying potable water to the public supply network. The largest pumps can transport 3,500 m3 of water per hour over an elevation of 110 meters. Do different water qualities and flocculating agents also mean different types of devices for measuring the flow? Not necessarily....

Open the catalog to page 12
Water & Wastewater - 15

Flocculation system Corrosion protection and disinfection – Finding the right degree In waterworks, the untreated water from all of the vertical wells is consolidated in deep containers. Here, natron base liquor for increasing the ph value and monophosphate are dosed for protecting the pipeline network and home installation from corrosion. Optionally, a chlorine bleaching system can be connected for dosing, to prevent microbiological effects. These dosings require the use of a flowmeter, which stands out on the one hand due to its extraordinary measuring accuracy (± 0.15 %) and which is...

Open the catalog to page 15
Water & Wastewater - 16

The run-out – Clean and neat Flowmeters in the run-out of the waterworks and in the distribution network work in responsible positions. After all, they measure the potable water intended for the population and must precisely comply with the strict legal regulations. This also affects the selection of the flowmeter and its materials inside the measuring pipe. Thus, only sensors that have liners that are approved as per KTW and DVGW worksheet 270 as well as respective guidelines according to the UBA may be used in Germany. The OPTIFLUX from KROHNE meets these criteria and is the first choice...

Open the catalog to page 16
Water & Wastewater - 18

Emergency chlorination Measuring the chlorine content in the emergency chlorination Many municipal waterworks perform no permanent disinfection of drinking water. However, in many cases a process known as emergency chlorination takes place. The process is switched on in case of need, adding chlorine to the drinking water as a disinfectant. Emergency chlorination is special in that it is only very rarely required, which means that non-chlorinated water usually flows through the measuring systems. Conventional measurement technology is now often faced with the problem of biological fouling...

Open the catalog to page 18

All KROHNE Messtechnik GmbH catalogs and technical brochures

  1. OPTISONIC 8300

    40 Pages

  2. DW 181

    28 Pages

  3. IFC 050

    32 Pages

  4. C95 CI

    4 Pages

  5. BM 500

    16 Pages

  6. H250 M40

    48 Pages

  7. OPTIFLUX 1000

    24 Pages

  8. IFC 100

    36 Pages

  9. H250 M40

    20 Pages

  10. WATERFLUX 3070

    24 Pages

  11. VISCOLINE

    2 Pages

  12. BM 26

    2 Pages

  13. OPTISONIC 3400

    16 Pages

  14. OPTIMASS 6400

    16 Pages

  15. MICRO-SET

    12 Pages

  16. ALTOSONIC V12

    18 Pages

  17. DW 18 SERIES

    28 Pages

Archived catalogs

  1. CARGOMASTER

    16 Pages

  2. UFM 3030

    16 Pages

  3. TR TC

    28 Pages