IFC 100 - 36 Pages

Add to MyDirectIndustry favorites
IFC 100

Catalog excerpts

Technical Datasheet Signal converter for electromagnetic flowmeters • Simple and easy to install and start-up • Diagnostics of device and application • Extremely fast signal conversion \_/ APPROVED COMMUNICATION PROTOCOL FOUNIMTION '_ _I_II_'_ The documentation is only complete when used in combination with the relevant documentation for the flow sensor.

 Open the catalog to page 1

1.1 The more than economical solution The IFC 100 electromagnetic signal converter is designed to measure the flow velocity, conductivity, volume and mass flow of electrically conductive, liquid media. The signal converter can be combined with any measuring sensor, making it very widely used. In terms of available housing versions, there is a compact variant, in which the signal converter is connected to the measuring sensor, as well as a 0° and 45° version. If the measuring point is difficult to access or the ambient conditions prevent the use of the compact variant, the signal converter...

 Open the catalog to page 3

Highlights • Simple installation and start-up • Available inputs and outputs: Current output (incl. HART®), pulse/frequency output, status output and control input • Large backlit graphic display with intuitive operation • A variety of operating languages integrated as standard • Maintenance free • Excellent price/performance ratio • Extremely quick signal conversion • Higher accuracy by extended calibration Water & Wastewater Agriculture Heating, Ventilation & Air Conditioning (HVAC) Machinery Power plants Measuring homogeneous media Water distribution networks and spray-irrigation systems...

 Open the catalog to page 4

1.2 Options and variants Modular converter concept Despite its somewhat different appearance, the IFC 100 has many of the same functions as its "big brother" IFC 300. Diagnostic function, conductivity measurement and simple navigation to name but a few. This latest member of the converter family also has a large number of fully-developed functions: • various power supply versions (AC, DC, AC/DC) • HART® as standard • Foundation Fieldbus, Profibus PA/DP or Modbus • optional Ex version available (Compact version as 45° version) Compact design in various versions The IFC 100 C in the 0°...

 Open the catalog to page 5

Remote version in wall-mounted housing For temperature effects, vibration or in places that are difficult to access, remote installation is possible with the IFC 100 W. A signal cable is used to connect the measuring sensor and the converter for the purposes of power supply and signal processing. The electronics can be used in all housing versions without having to be reconfigurated. (signal converter in wall-mounted housing) Diagnostics The IFC 100 has been equipped with a wide variety of diagnostic tools for device function and application check. • Conductivity measurement • Electrode...

 Open the catalog to page 6

1.3 Signal converter / measuring sensor combination possibilities Measuring sensor Measuring sensor + signal converter IFC 100 Compact (0°/45° version) Remote wall-mounted housing 1.4 Measuring principle An electrically conductive fluid flows inside an electrically insulated pipe through a magnetic field. This magnetic field is generated by a current, flowing through a pair of field coils. Inside of the fluid, a voltage U is generated: U=v*k*B*D in which: v = mean flow velocity k = factor correcting for geometry B = magnetic field strength D = inner diameter of flow meter The signal voltage...

 Open the catalog to page 7

2.1 Technical data • The following data is provided for general applications. If you require data that is more relevant to your specific application, please contact us or your local sales office. • Additional information (certificates, special tools, software,...) and complete product documentation can be downloaded free of charge from the website (Download Center). Measuring system Measuring principle Application range Continuous measurement of current volume flow, flow velocity, conductivity, mass flow (at constant density), coil temperature of the measuring sensor Design Modular...

 Open the catalog to page 8

Display and user interface Graphic display LC display, backlit white. Size: 128 x 64 pixels, corresponds to 59 x 31 mm = 2.32" x 1.22" Ambient temperatures below -25°C / -13°F may affect the readability of the display. Operating elements 4 push buttons for operator control of the signal converter without opening the housing. Remote control PACTwareTM (including Device Type Manager (DTM)) HART® Hand Held Communicator from Emerson Process AMS® from Emerson Process PDM® from Siemens All DTMs and drivers are available free of charge from the manufacturer's website. Display functions Operating...

 Open the catalog to page 9

Operating conditions Temperature Process temperature Refer to technical data for the measuring sensor. Ambient temperature Depending on the version and combination of outputs. It is a good idea to protect the converter from external heat sources such as direct sunlight as higher temperatures reduce the life cycle of all electronic components. Ambient temperatures below -25°C / -13°F may affect the readability of the display. Storage temperature Pressure Medium Refer to technical data for the measuring sensor. Ambient pressure Chemical properties Electrical conductivity All media except for...

 Open the catalog to page 10

Electrical connection General Electrical connection is carried out in conformity with the VDE 0100 directive "Regulations for electrical power installations with line voltages up to 1000 V" or equivalent national specifications. Power supply 100…230 VAC (-15% / +10%), 50/60 Hz; non-Ex: standard; Ex: optional 240 VAC + 5% is included in the tolerance range. 24 VDC (-55% / +30%); only available as non Ex version 12 VDC - 10% is included in the tolerance range. 24 VAC/DC (AC: -15% / +10%; DC: -25% / +30%); non-Ex: standard; Ex: optional 12 V is not included in the tolerance range. Power...

 Open the catalog to page 11

Current output Output data Volume flow, mass flow, diagnostic value, flow velocity, coil temperature, conductivity Without HART® Q = 0%: 0…20 mA; Q = 100%: 10…21.5 mA Error identification: 20…22 mA With HART® Q = 0%: 4…20 mA; Q = 100%: 10…21.5 mA Error identification: 3…22 mA Operating data I ≤ 22 mA RL ≤ 750 Ω HART® at terminals A Uext ≤ 32 VDC HART® Description HART® protocol via active and passive current output HART® version: V5 Universal Common Practice HART® parameter: completely supported ≥ 250 Ω at HART® test point; Note maximum load for current output! Multi-drop mode Yes, current...

 Open the catalog to page 12

All KROHNE Messtechnik catalogs and technical brochures

  1. IFC 050

    32 Pages

  2. C95 CI

    4 Pages

  3. BM 500

    16 Pages

  4. H250 M40

    48 Pages

  5. OPTIFLUX 1000

    24 Pages

  6. H250 M40

    20 Pages

  7. WATERFLUX 3070

    24 Pages

  8. VISCOLINE

    2 Pages

  9. BM 26

    2 Pages

  10. OPTISONIC 3400

    16 Pages

  11. OPTIMASS 6400

    16 Pages

  12. MICRO-SET

    12 Pages

  13. ALTOSONIC V12

    18 Pages

  14. DW 18 SERIES

    28 Pages

Archived catalogs

  1. CARGOMASTER

    16 Pages

  2. UFM 3030

    16 Pages

  3. TR TC

    28 Pages