HYG.Accessories - 24 Pages

Add to MyDirectIndustry favorites
HYG.Accessories

Catalog excerpts

Technical Datasheet Hygienic process connections for sensors and configuration tool for • level measurement sensors and continuous level measurement • temperature sensors • conductivity measurement

 Open the catalog to page 1

1.1 Introduction The global food industry uses a large variety of different types of hygienic process connections. In order to achieve the correct connection for all process, the KROHNE adapters described in this document have to be used. 1.2 Description The hygienic process connections can be used on devices for level, temperature and conductivity sensors for installation in pipelines or tanks. Adapters must be selected according to the individual thread of the measuring device; which is either 1/2" (G1/2h) or 1" (G1h) hygienic. The special feature about this sealing concept is that the...

 Open the catalog to page 3

D HYGIENIC CONNECTIONS1.3 Overview of process adapters Connection

 Open the catalog to page 4

HYGIENIC CONNECTIONS D Connection

 Open the catalog to page 5

D HYGIENIC CONNECTIONS1.4 Technical data of hygienic process adapters and accessoriesDescription Hygienic clamp adapters according to iSo 2852, DIN 32676 and Tri Clover Hygienic clamp adapters according to ISO 2852, DIN 32676 and Tri Clover KPH3-3216 Type / order code Process connection Device connection Device series Material Surface roughness [p.m] Max. pressure Approval EHEDG for ISO and DIN clamps only in combination with seals from Combifit Int'l BV, The Netherlands. Order code Order code Gasket EPDM (3-A, FDA) EPDM (EHEDG) Drawing / dimensions

 Open the catalog to page 6

HYGIENIC CONNECTIONS D Description Hygienic clamp adapters according to ISO 2852, DIN 32676 and Tri Clover Hygienic VARIVENT® adapters Type / order code Process connection Device connection Device series Material Surface roughness [pm] Max. pressure Approval EHEDG for ISO and DIN clamps only in combination with seals from Combifit Int'l BV, The Netherlands. Order code Clamp ring Order code Gasket EPDM (3-A, FDA) EPDM (EHEDG) O-ring Drawing / dimensions

 Open the catalog to page 7

Hygienic adapters according to SMS 1145 <* Type / order code Process connection 38mm SMS conical ferrule 51mm SMS conical ferrule Device connection Device series Surface roughness [p.m] Max. pressure Approval Order code Union nut SMS 1145 Order code Gasket NBR Drawing / dimensions

 Open the catalog to page 8

HYGIENIC CONNECTIONS D Description Hygienic adapters according to DIN 11851 Type / order code Order code Gasket Drawing / dimensions

 Open the catalog to page 9

Hygienic adapters according to DIN 11851 Type / order code Process connection Device connection Device series 3-A, EHEDG only in combination with special gasket from S.K.S. BV, The Netherlands or ASEPTO-Star K-flex from Kieselmann, Germany. Order code Union nut Order code Gasket NBR Drawing / dimensions

 Open the catalog to page 10

HYGIENIC CONNECTIONS D Description Hygienic adapters according to DIN 11864-1 Form A Type / order code Process connection Device connection Device series Material Surface roughness [pm] Max. pressure Approval Order code Union nut Order code Gasket Drawing / dimensions

 Open the catalog to page 11

Hygienic adapters according to DIN 11864-1 Form A Type / order code Process connection Device connection Device series Material Surface roughness [pm] Max. pressure Approval Order code Union nut Order code Gasket NBR Drawing / dimensions

 Open the catalog to page 12

HYGIENIC CONNECTIONS D Description Industrial weld-in sleeves Hygienic weld-in sleeves Type / order code Process connection Tank, pipes Tank with inspection hole Device connection Device series Material Surface roughness [pm] Max. pressure Approval Drawing / dimensions

 Open the catalog to page 13

Hygienic weld-in sleeves Type / order code Process connection Device connection Device series KPW3-322 Thin walled tanks, pipes G1/2B hygienic OPTISWITCH 6500/ 6600 Material Surface roughness [pm] Max. pressure Approval Drawing / dimensions

 Open the catalog to page 14

HYGIENIC CONNECTIONS D Description Vibronic level switch replacement Process connection    E+H FTL Device connection Device series Material Surface roughness [pm] Max. pressure Approval Drawing / dimensions

 Open the catalog to page 15

Vibronic level switch replacement Type / order code Process connection Device connection Device series Material Surface roughness [pm] Max. pressure Approval Drawing / dimensions

 Open the catalog to page 16

HYGIENIC CONNECTIONS D Description Blanking plugs Type / order code Process connection Device connection Device series Blanking plug Material Surface roughness [pm] Max. pressure Approval Drawing / dimensions

 Open the catalog to page 17

Welding mandrels for threaded hygienic welded connections Type / order code Process connection Device connection Device series Material Approval Drawing / dimensions KPX6-66 Welding mandrel G1B hygienic / G1B cone

 Open the catalog to page 18

HYGIENIC CONNECTIONS D Description

 Open the catalog to page 19

2.1 Description of the configuration tool The configuration tool is the dedicated configuring tool for • OPTISWITCH 6500 • OPTISWITCH 6600 • OPTISYS IND 8100 The configuration tool is basically operated from a standard PC with a USB connector. It can be disconnected from the PC and brought to the remote site (non Ex area) for monitoring and reconfiguration of the specific product. In this case the configuration tool and the device is powered by the internal battery. Figure 2-1: Configuration tool The FDT based communication offers the possibility to upload and store the actual settings....

 Open the catalog to page 20

CONFIGURATION TOOL 2 2.2 Technical data of the configuration tool Supply voltage

 Open the catalog to page 21

© KROHNE 09/2018 - 4000035705 - TD Accessories hyg. R06 en - Subject to change without notice. KROHNE - Process instrumentation and measurement solutions • Flow • Level • Temperature • Pressure • Process Analysis • Services Head Office KROHNE Messtechnik GmbH Ludwig-Krohne-Str. 5 47058 Duisburg (Germany) Tel.: +49 203 301 0 Fax: +49 203 301 10389 info@krohne.com The current list of all KROHNE contacts and addresses can be found at: www.krohne.com

 Open the catalog to page 24

All KROHNE Messtechnik catalogs and technical brochures

  1. IFC 050

    32 Pages

  2. C95 CI

    4 Pages

  3. BM 500

    16 Pages

  4. H250 M40

    48 Pages

  5. OPTIFLUX 1000

    24 Pages

  6. IFC 100

    36 Pages

  7. H250 M40

    20 Pages

  8. WATERFLUX 3070

    24 Pages

  9. VISCOLINE

    2 Pages

  10. BM 26

    2 Pages

  11. OPTISONIC 3400

    16 Pages

  12. OPTIMASS 6400

    16 Pages

  13. MICRO-SET

    12 Pages

  14. ALTOSONIC V12

    18 Pages

  15. DW 18 SERIES

    28 Pages

Archived catalogs

  1. CARGOMASTER

    16 Pages

  2. UFM 3030

    16 Pages

  3. TR TC

    28 Pages