OPTITEMP TR | TC 100
28Pages

{{requestButtons}}

Catalog excerpts

OPTITEMP TR | TC 100 - 1

.book Page 1 Tuesday, March 6, 2012 10:08 AM OPTITEMP TR/TC 100 Technical Datasheet Measuring inserts: TR 100 resistance thermometers and TC 100 thermocouples • Flexible, mineral insulated design • Fully universal • Spring loaded design © KROHNE 03/2012 - 4001019102 - TD OPTITEMP TR/TC 100 R02 en

Open the catalog to page 1
OPTITEMP TR | TC 100 - 3

Product features .book Page 3 Tuesday, March 6, 2012 10:08 AM PRODUCT FEATURES 1 OPTITEMP TR/TC100 1.1 Heavy-duty mineral insulated measuring inserts The OPTITEMP TR/TC 100 measuring inserts are intended for installation in thermometer assemblies and are made using mineral insulated mantle cable. They feature flexibility, superior insulation resistance and a high degree of vibration resistance. The TR 100 version contains a Pt100 RTD with a characteristic curve according to DIN EN 60751. The TC 100 version features a thermocouple according to DIN EN 60584. Thermocouple measuring inserts...

Open the catalog to page 3
OPTITEMP TR | TC 100 - 4

.book Page 4 Tuesday, March 6, 2012 10:08 AM 1 PRODUCT FEATURES OPTITEMP TR/TC100 Industries • • • • • • • • Chemical and Petrochemical Oil and Gas Power Supply Machinery Pharmaceuticals and Food & Beverage Water and Wastewater Iron and Steel Paper and Pulp Applications Different process connections allow thermometer assemblies to be adapted for use in almost all industrial sectors: • • • • 4 Insertion-type thermometer Threaded thermometer Flange thermometer Weld-in thermometer www.krohne.com 03/2012 - 4001019102 - TD OPTITEMP TR/TC 100 R02 en

Open the catalog to page 4
OPTITEMP TR | TC 100 - 5

.book Page 5 Tuesday, March 6, 2012 10:08 AM PRODUCT FEATURES 1 OPTITEMP TR/TC100 1.2 Options and variants Variant with ceramic terminal block • • • • • • Fully sealed solder joints Pt100 connection in 2, 3 and 4-wire connection Available with 2, 3, 4, 6 or 8 connection terminals Sheath diameter: 3 + 0 - 0.1 mm Sheath diameter: 6 + 0 - 0.1 mm Washer disc with 2 screws, 2 springs and 2 locking rings Variant with flying wire ends Excepting the following points, the features correspond to those of the version with ceramic terminals: • Colour-coded, Teflon-insulated lead wires • Lead wires...

Open the catalog to page 5
OPTITEMP TR | TC 100 - 6

.book Page 6 Tuesday, March 6, 2012 10:08 AM 1 PRODUCT FEATURES OPTITEMP TR/TC100 All three variants (with terminal block, with flying wire ends, with head-mounted transmitter) are available with the following sheath diameters and sensor types: Pt100 measuring insert, Ø 3 mm • Sheath diameter 3 mm / 0.12": Available with thin film RTD (1) and wire-wound RTD (2) • Mineral insulated mantle cable (material 1.4404) • Magnesium oxide insulation (MgO) • 1 x Pt100 in 2, 3 or 4-wire connection • 2 x Pt100 in 2-wire connection Pt100 measuring insert, Ø 6 mm • Sheath diameter 6 mm / 0.24": Available...

Open the catalog to page 6
OPTITEMP TR | TC 100 - 7

.book Page 7 Tuesday, March 6, 2012 10:08 AM PRODUCT FEATURES 1 OPTITEMP TR/TC100 All three variants (with terminal block, with flying wire ends, with head-mounted transmitter) are also available as intrinsically safe measuring inserts. The ATEX marking is: inserts II 1 G Ex ia IIC T6 The intrinsically safe measuring inserts always have a sheath diameter of 6 mm / 0.24". The following options are available: • Sensor: 1 x Pt100 RTD (wire-wound, ceramic) or 1 x thermocouple ("K" or "J") • Tolerance class A (Pt100) or 1 (thermocouple) 1.3 Measuring principle 1.3.1 Resistance thermometer The...

Open the catalog to page 7
OPTITEMP TR | TC 100 - 8

.book Page 8 Tuesday, March 6, 2012 10:08 AM 1 PRODUCT FEATURES OPTITEMP TR/TC100 1.3.2 Thermocouples The thermocouple features two electric conductors made from different metals, connected at one end. Each free end is connected to a compensation cable which is then connected to a millivolt meter. This circuitry forms a "thermal circuit". The point at which the two electric conductors connect is called the measuring point and the point at which the compensation cables connect to the conductors of the millivolt meter is called the cold junction. If the measuring point of this thermal circuit...

Open the catalog to page 8
OPTITEMP TR | TC 100 - 9

Technical data .book Page 9 Tuesday, March 6, 2012 10:08 AM TECHNICAL DATA 2 OPTITEMP TR/TC100 2.1 Technical data tables 2.1.1 Technical data TR 100 • The following data is provided for general applications. If you require data that is more relevant to your specific application, please contact us or your local representative. • Additional information (certificates, special tools, software,...) and complete product documentation can be downloaded free of charge from the website (Download Center). Thin film Pt100 (TF) Wire-wound Pt100 (WW) Measuring system Measuring principle Resistance...

Open the catalog to page 9
OPTITEMP TR | TC 100 - 10

.book Page 10 Tuesday, March 6, 2012 10:08 AM 2 TECHNICAL DATA OPTITEMP TR/TC100 Operating conditions Shock and vibration acc. to DIN EN 60751 (10...500 Hz) ≤10 g, ≤20 g for shock resistant version ≤3 g Materials Mineral insulated mantle cable Insulated with magnesium oxide (MgO) Inner conductor Copper (Cu) or nickel (Ni) Sheath Chromium-nickel steel (CrNi), e.g. 316L Approvals ATEX (pending) 10 II 1/2 GD EEx ia 2C T6...T1 (+85...+450°C / +185...+842°F) www.krohne.com 03/2012 - 4001019102 - TD OPTITEMP TR/TC 100 R02 en

Open the catalog to page 10
OPTITEMP TR | TC 100 - 11

.book Page 11 Tuesday, March 6, 2012 10:08 AM TECHNICAL DATA 2 OPTITEMP TR/TC100 2.1.2 Technical data TC 100 • The following data is provided for general applications. If you require data that is more relevant to your specific application, please contact us or your local representative. • Additional information (certificates, special tools, software,...) and complete product documentation can be downloaded free of charge from the website (Download Center). Thermocouple type J Thermocouple type K Measuring system Measuring principle Thermocouple measuring insert acc. to DIN 43735-1. Type of...

Open the catalog to page 11
OPTITEMP TR | TC 100 - 15

.book Page 15 Tuesday, March 6, 2012 10:08 AM TECHNICAL DATA 2 OPTITEMP TR/TC100 2.3 Permissible flow speed The maximum permissible flow speed for the measuring insert depends on its immersion depth and on the density of the product. The greater the immersion depth and the higher the density, the larger the load. If the measuring insert is used in the thermowell, the flow speed is irrelevant. If, however, the flow goes against an unprotected measuring insert, its load must be calculated individually. If this is the case, the manufacturer will offer further support. 2.4 Permissible operating...

Open the catalog to page 15

All KROHNE Messtechnik GmbH catalogs and technical brochures

  1. OPTISONIC 8300

    40 Pages

  2. DW 181

    28 Pages

  3. IFC 050

    32 Pages

  4. C95 CI

    4 Pages

  5. BM 500

    16 Pages

  6. H250 M40

    48 Pages

  7. OPTIFLUX 1000

    24 Pages

  8. IFC 100

    36 Pages

  9. H250 M40

    20 Pages

  10. WATERFLUX 3070

    24 Pages

  11. VISCOLINE

    2 Pages

  12. BM 26

    2 Pages

  13. OPTISONIC 3400

    16 Pages

  14. OPTIMASS 6400

    16 Pages

  15. MICRO-SET

    12 Pages

  16. ALTOSONIC V12

    18 Pages

  17. DW 18 SERIES

    28 Pages

Archived catalogs

  1. CARGOMASTER

    16 Pages

  2. UFM 3030

    16 Pages

  3. TR TC

    28 Pages