Catalogs >
KROHNE Messtechnik GmbH >
C95 Digital Panel Meter

C95 Digital Panel Meter
4Pages

Catalog excerpts

C 95 Digital Panel Meters Programmable ± 10,000 points The C 95 is one of a series of highly accurate digital panel meters. Each instrument has a highly legible 10,000-point 5-digit red display, whose brightness is ideally suited to use in industrial control rooms. The C 95 is the perfect choice for displaying. Monitoring and transmission of process data from any source in the plant. A simple 4-key touch-button control facilitates programming and subsequent operation. DC current or voltage Bidirectional ±100 mV, ±1 V, ±10 V, ±300 V, 20mA Analog output: 3 types available A1: Active current output 0/4...20 mA • Accuracy 0.1 % in relation to display (at +25°C) • Residual drift ≤ 0.2% • Admissible load: 0 Ω 2 kΩ (voltage) • Programmable scale ratio with enlarging effect • Response time: 40 ms Relay output: 2 types available R: 2 set point relays, independently programmable R4: 4 set point relays, independently programmable • Hysteresis independently programmable from 0 to 100% of set point in the display unit • Temporisation independently programmable from 0 to 25 s in 0.1 s steps • NO-NC contact 8 A - 250 V on resistive load Digital output N: Data link RS485 (2 wires) • Protocols MODBUS-JBUS data format: Integer / double integer • Slave number programmable from 1 to 255 with a rate from 1200 to 19200 Bauds Accuracy 0.05% of full scale at +25 °C Thermal drift < 150 ppm/°C Scale overlapping measurable from -5% to +5% Programmable scale factor Enlarging effect - Square root extraction Special linearisation 20 points Supply for 2 or 3 wire sensor 26 VDC

Open the catalog to page 1

Panel Meter C 95 Technical Data Display Approx. 10,000 points (14 mm) Electroluminescent red (green as option) 4 alarm messages -10 000 / +100 000 points (14 mm) (as option); -2 000 / +10 000 points (20 mm) Features Sampling times Input impedance Drop Rejection rate Insulation 100 ms ≥ 1 MΩ for voltage inputs 0.9 V max. for current input Common mode: 130 dB Mode series: 70 dB 50/60 Hz Input / Output: 2.5 kV eff. 50Hz-1min Inputs / Power Supply: 2.5 kV eff., 50 Hz- 1min Zero drift compensation and self-calibration Programmable integration index Allows stabilising display in case of unsteady...

Open the catalog to page 2

Approvals Emission and immunity in industrial environment CE EN 50081-2; EN 50082-2 EN 61000-4-2 level 3, EN 61000-4-3 level 3, EN 61000-4-4 level 4, EN 61000-4-6 level 3 According to directive CEM 89-336 Environment Front face protection IP 65 Operating temperature -5...55°C Storage temperature -30°C...+80°C Relative dampness 80% annual average Weight with / without output board 250g / 150g Connection with screwed plug-off connectors (for 2.5 mm² cable, flexible or single strand) Case in self-extinguishing black UL 94 VO ABS Electrical connections Locations of options and combinations Any...

Open the catalog to page 3

Access code An access code settable from 0000 to 9999 prevents unauthorised programming of indicator, set points and locks access to some functions. The factory code is 0000. 0-5 6-9 Access to fast entering of alarm set-points No access 0-5 6-9 Access to function “tare” (except t° inputs) No access 0-5 6-9 Access to measurement and output simulations No access 0-5 6-9 Access to shifted scales No access Ordering code Output options: A Analogue R 2 relays R4 4 relays N Digital link (RS 485 2 wires) Power supply: 2 High voltage 3 Low voltage This instrument is designed for industrial...

Open the catalog to page 4