
• Unique compact, robust design for parallel installation and tight spaces • Best in class: temperature range, accuracy, pressure drop and flow range • Outputs: 4...20 mA, pulse, frequency, switch, lO-Link or Modbus
Open the catalog to page 1KROHNE – Measure the facts Welcome to KROHNE. As a leader in process measuring technology, we’re at home in a wide variety of industries worldwide. The name KROHNE has stood for innovative and reliable solutions since 1921. We offer a whole spectrum of instruments for flow, level, temperature and pressure measurement as well as process analysis. Our portfolio is rounded out by comprehensive services and consulting. Thanks to KROHNE’s extensive knowledge in electromagnetic flow measurement you can count on a measurement true to our promise “measure the facts”. Based on that promise, our new AF-E...
Open the catalog to page 2AF-E 400 - Simply the best in its classTypical applications • Cooling water monitoring in machinery such as bending and welding robots, injection moulding and web handling equipment • Water consumption measurement in washing installations such as grit washers, car washes, industrial washes • Flow monitoring in recirculation of hot and cold water Compact, robust, reliable and cost-effective - these are important characteristics of instrumentation in industrial automation. The AF-E 400 is the culmination of KROHNE expertise in a best-in-class electromagnetic flowmeter specially designed for this...
Open the catalog to page 3innovative Construction Loaded with functionality, purpose in every detail The design of the AF-E 400 is specifically adjusted for ultra-compact installation. Three small printed circuitry boards are stacked in the device to enable the sleekest housing. This allows installation in distribution manifolds or cabinets where tubes are usually very closely spaced. LED for switch points visible from all sides Its 2 mm/0.08” thick cast stainless steel housing also makes the AF-E 400 much more robust than the plastic or sheet-metal housings used in similar products on the market. Thanks to the rotatable,...
Open the catalog to page 4innovative Construction Full-colour rotatable display Integrated temperature sensor High-performance PEEK flow tube with round bore reduction Robust compact 2 mm thick cast stainless-steel housing
Open the catalog to page 5innovative Construction PEEK lining Traditionally, flowmeters consist of a metal flow tube with a liner. This results in higher manufacturing costs and a more expensive end product. The AF-E 400 flow tube is made of high-quality, glassreinforced injection-moulded PEEK. The magnetic circuit production is fully automated. This allows for highly repeatable production processes and reliability. The high-performance plastic flow tube is resistant to a wide range of chemicals, temperature and pressure.
Open the catalog to page 6innovative Construction Round bore sensor design Where other producers sometimes choose a rectangular bore in combination with PEEK, the AF-E 400 flow tube has been designed with a round bore. This makes the flowmeter more resilient against increased pressure. As a result, the flowmeter maintains its accuracy specification over a wide pressure and temperature range. The slight reduction in the round bore straightens inconsistencies in the flow profile and removes the need for inlet and outlet runs. In this way, the meter is suitable for compact installation close to bends or valves. Thanks to...
Open the catalog to page 7easy Handling It’s all about utility Installation in tight spaces without crosstalk The AF-E 400 was designed with tight spaces in mind. An electromagnetic flowmeter typically carries the risk of crosstalk. It can influence the measurement of another device installed close to it because of magnetic field overlap. The special design of the magnetic circuit, field strength and electronics of the AF-E 400 allows units to be positioned in extreme proximity to each other: as close as 2 mm/0.08”. In the field that means maximum flexibility when installing the device. Quick commissioning The factory...
Open the catalog to page 8The meter that monitors itself Thanks to extensive self-diagnostics, a reliable operation can be assured. The meter continuously monitors several critical aspects including: • Incorrect parametrisation • Flow range exceedance or short circuit on any of its outputs Warning messages categorised according to NE107 alert the user via the display and the IO-Link output.
Open the catalog to page 11We examined some of the common issues with products in this segment and translated them into improvements across the board. AF-E 400 features for example the highest temperature capability. The continuous use at +90°C/+194°F liquid temperature allows its operation in very demanding cooling and hot water applications. The latest insights at KROHNE in magnetic field design and signal conversion enable the highest accuracy without adding costs. Furthermore, the combination of tight seals and laser welding guarantees high IP65 and IP67 ingress protection. The integrated temperature measurement eliminates...
Open the catalog to page 12superior Performance
Open the catalog to page 13Compatible In terms of electrics the AF-E 400 has been developed with compatibility in mind. The device runs on the very common 24 VDC supply voltage and features many different output options like the traditional pulse, frequency and switch but also more modern IO-Link and Modbus. Connecting industrial networks using the IO-Link communication standard is versatile, fast and efficient - from the controller down to the lowest level of automation. Analogue signals are transported noise-free thanks to digitisation, and all sensors become open to the Fieldbus level. Continuous diagnostics and automated...
Open the catalog to page 14versatile Communication AF-E-400 installed in welding robot IO-Link master Control room
Open the catalog to page 15Accessories The AF-E 400 can be supplied with a variety of adapters to adjust to different piping. Mounting adapters It can be used in combination with all IO-Link masters and cabling on the market and the proper IODDs available from KROHNE.com. Any existing parametrisation tool for IO-Link can be used to set the device. G1/2 sensor to G1/2 female G1 sensor to G1 female G1 sensor to R 3/4 male G3/4 sensor to R 1/2 male G1/2 sensor to R 1/2 male G1 sensor to 3/4” NPT male G1/2 sensor to 1/2” NPT male
Open the catalog to page 1620 Pages
28 Pages
12 Pages
20 Pages
4 Pages
16 Pages
20 Pages
2 Pages
84 Pages