Introduction
This document provides guidelines for precise and clean cutting of materials such as gres, ceramics, tiles, marble, and granite using specific tools and techniques.

Specifications
The tools used for cutting are equipped with electrodeposited industrial diamond edges and feature lateral openings for cooling and core ejection. They are designed for wet drilling, which involves continuous water cooling to maintain tool efficiency and prevent overheating.

Procedures
1. Initial Setup: Wet the surface to be cut. Position the tool at a 45° angle and slowly turn to create an initial seat.
2. Cutting Process: Gradually move the tool to a vertical position while continuously cooling it. Complete the cut by maintaining consistent cooling.
3. Post-Cut: Eject the core and thoroughly cool the tool before starting a new cut. On vertical surfaces, ensure the tool is cooled multiple times during the cutting process.

Recommendations
For optimal performance, use the tool exclusively in rotation mode with continuous water cooling. Employ the PRCD safety system when using electric drills to ensure safety.

Technical Parameters
Recommended RPM for different diameters:
- Ø 4 - 6 mm: 1000 RPM
- Ø 7 - 10 mm: 800 RPM
- Ø 12 - 16 mm: 500 RPM

Conclusion
Following these guidelines will ensure precise and efficient cutting of hard materials while maintaining tool integrity and safety.