vMAX Brochure
4Pages

KREBS vMAX™ Vertical Cantilever Pump • For sump & process duties that require reduced degradation of pumped solids • Increased operational life

KREBS® vMAX™ Pumps Cyclone feed Mill discharge Industrial processing Heavy-duty abrasive slurries Power Plants vMAX™ Vertical Sump vMAX™ vertical cantilever sump pumps are designed for continuous abrasive slurry service in sumps without the need for sump level control or submerged bearings. * cantilever design has no stuffing box seal, no submerged bearings. sizes for setting depths of 1.4m, * rigid 1040 steel shaft with large bearing span to reduce shaft deflection and bearing loads. * induced flow 8-vane impeller is recessed out of casing flow path to pass extra large solids, rags and...

* drive end bearing is fixed clearance twin Timken taper roller for axial thrust and impeller end bearing is parallel roller for radial * grease lubricated bearings * integral mounting plate for supporting pump above sump. * steel discharge pipe extends above liquid level and is fixed to the mounting plate for access to customer piping. * adjustable motor mount integral to power frame assembly with vee belt drive tensioning capability, * lifting yoke provided for crane hook suspension over sump. Resulting Performance * reliable continuous operation when slurry is available. * no shaft...

Extreme Duty Vertical Cantilever Pump for Sump and Process Duties The new “vMAX™” line of vertical cantilever hard metal pumps has been developed for conventional clean up sump duties and process duties that require reduced degradation of pumped solids. The fully recessed torqueflow cup style impeller design permits passing of pipe size solids and operation without the need for sump level control. The casing is configured for bottom suction only to prevent build up of solids in the bottom of the sump. Leakage from the back of the casing, through the life of the pump, is prevented by high...