1. Catalogs
  2. Krautzberger
  3. Spray gun Mignon 3

Spray gun Mignon 3

Spray gun Mignon 3
1 / 61 PagesView full catalog

Spray gun Mignon 3

Product catalog summary
Function and Identification
The Mignon 3 hand-held spray gun is designed for applying coatings with liquid to low-viscosity materials like paints and adhesives. It uses compressed air for atomization, with adjustable spray patterns and quantities. The device is available in various designs and is made from materials such as aluminum and stainless steel.
Using the Operating Manual
This section explains safety symbols and signal words like DANGER, WARNING, and CAUTION. It outlines personnel requirements and emphasizes the importance of personal protective equipment (PPE).
Safety and Responsibility
General safety instructions cover intended use, misuse, owner responsibilities, and residual risks. Emergency procedures are also discussed.
Transport and Storage
Guidelines for safe transport and storage include packaging instructions and environmental conditions.
Installation
Installation procedures include safety measures and specific connections for the spray gun.
Operation
Operational instructions cover safety precautions, start-up, operation, spray pattern adjustments, and shutdown processes.
Maintenance
Maintenance involves safety measures, a schedule, and instructions for cleaning and replacing parts like the fluid needle, nozzles, and O-rings.
Troubleshooting
Guidance on addressing common issues is provided, along with customer care information.
Spare Parts and Accessories
Information on available spare parts and accessories is provided.
Disassembly and Disposal
Instructions for safe disassembly and disposal of the spray gun are included.
Technical Data
Technical specifications, including dimensions and weight, are detailed.
Declaration of Conformity
The document concludes with a declaration of conformity, ensuring compliance with applicable standards.
Personal Protective Equipment (PPE) Recommendations
Necessary PPE includes protective clothing, ear protection, respiratory protection, safety goggles, gloves, shoes, and a helmet. Selection should be based on environmental conditions and material safety data sheets.
General Safety Instructions
Warnings about handling hazardous media, compressed air, and sound pressure levels are provided. The owner is responsible for implementing safety measures.
Intended Use and Misuse
The spray gun is for coating surfaces with liquid to low-viscosity materials. Misuse includes using it beyond its intended purpose or with inappropriate materials.
Owner Responsibilities
The owner must maintain the machine, adhere to maintenance schedules, and comply with safety and environmental regulations.
Residual Risks and Emergency Procedures
Despite high safety standards, potential risks exist. The spray gun should be used as intended and in a defect-free condition.
Transport and Storage
The spray gun should be stored in its original packaging in a dry, dust-free environment, with specific temperature and humidity conditions.
Installation and Operation
Installation must be performed by specialized personnel. During operation, ensure secure connections and appropriate air and fluid pressures.
Adjusting the Spray Pattern
The spray pattern can be adjusted using various nozzles. A cross-coating process is recommended for uniform application.
Nozzle Types and Descriptions
  • Round Jet: Cone-shaped stream.
  • Flat Jet: Width-adjustable jet for flat applications.
  • Rotary Jet: Twisting spray for complex geometries.
  • Full-Cone Rotary Jet: Suitable for undercuts with adjustable patterns.
Shutting Down Procedures
  • Temporary Shut-Down: Release lever, close supply, release energy.
  • Long-Term Shut-Down: Includes cleaning to remove hazardous materials.
Maintenance and Safety
  • Use OEM parts to avoid hazards.
  • Regularly check and replace wear parts.
  • Follow safety regulations and use protective equipment.
Cleaning the Spray Gun
  1. Interrupt operation and secure systems.
  2. Use detergent for cleaning.
  3. Spray until clean, then clean exterior.
Changing Components
  • Fluid Needle: Disassemble and reassemble with new parts.
  • Nozzles: Replace by loosening and tightening components.
  • Sealing Cone: Replace and grease new components.
  • O-Rings: Replace by disassembling and inserting new, greased O-rings.
Installation
Instructions for installing the O-ring and fluid pipe emphasize using correct parts and greasing components.
Disassembly
Instructions for safely disassembling the spray gun include securing systems and using proper tools.
Troubleshooting
A table details common errors, causes, and remedies, such as cleaning or replacing components.
Spare Parts and Accessories
Use OEM parts and provide necessary information for ordering. Accessories include gravity feed cups and nozzle extensions.
Disassembly and Disposal
Safety precautions for disassembly and recycling instructions are provided.
Technical Data
Specifications for dimensions, weight, air consumption, and other parameters are detailed.
Declaration of Conformity
Ensures compliance with relevant standards.
See more

Catalog excerpts

Spray gun Mignon 3-1

Operating instructions Hand-held Spray Gun Mignon 3 T-Dok-198-GB-Rev.3 200-0137 ■ 200-0138 ■ 200-0187 ■ 090-3566 ■ 200-0155 ■ 200-0156 Translation of the original operating instr

 Open the catalog to page 1
Spray gun Mignon 3-2

Thank you for selecting a Krautzberger product. This product has been manufactured following state-of-the-art manufacturing procedures and extensive quality assurance measures. We promise you a product of the highest quality. If you have questions, requests or suggestions, please contact us. We are always glad to assist you. Information about the operating manual This manual provides important information on how to work with the device safely and efficiently. The manual is part of the device and must always be kept in the immediate proximity of the device so that it is accessible to the personnel...

 Open the catalog to page 2
Spray gun Mignon 3-3

Hand-held Spray Gun Mignon 3

 Open the catalog to page 3
Spray gun Mignon 3-4

Operating instructions

 Open the catalog to page 4
Spray gun Mignon 3-5

Hand-held Spray Gun Mignon 3 1 Function and identification 1.1 Function The hand-held spray gun Mignon 3 is used for the coating of surfaces with liquid to low-viscose coating materials. Typical coating materials are: Paints, dyes, adhesives, glazes, enamels, debonding agents. The coating material is fed to the hand-held spray gun either under pressure (fluid pressure pumps or pressurised fluid containers to process large quantities of coating material) or through attached gravity feed cups or suction cups (for smaller quantities). Begin spraying process by pulling the trigger. The spraying process...

 Open the catalog to page 5
Spray gun Mignon 3-6

Operating instructions Product number Scope of delivery Model Fluid connection on the handle 200-0138 Fluid connection on the bottom of the head section 200-0187 Compressed air connection from the top on the main body 090-3566 Flow design ; HV3M 200-0155 Fluid connection on the handle ; HV3M 200-0156 Serial number The serial number of the hand-held spray gun is located on the main element. It serves as a unique identifier.

 Open the catalog to page 6
Spray gun Mignon 3-7

Hand-held Spray Gun Mignon 3 2 Using this operating manual 2.1 Symbols in this manual Safety instructions This manual uses symbols to identify safety instructions. The safety instructions are preceded by signal words that indicate the severity of the hazard. DANGER! This combination of symbol and signal word indicates an immediate dangerous situation, which will cause death or severe injuries if it is not averted. WARNING! This combination of symbol and signal word indicates a possibly dangerous situation which can cause death or severe injuries if it is not averted. CAUTION! This combination...

 Open the catalog to page 7
Spray gun Mignon 3-8

Operating instructions Example for safety instructions in operating instructions Safety instructions can refer to specific, individual operating instructions. Such safety instructions are embedded in the operating instructions so that they do not disrupt the reading flow during the execution of the action. The signal words described above are used. Unfasten screw. A CAUTION! Pinching hazard at the cover! Carefully close cover. 3._^ Tighten screw. Special safety instructions The following symbols are used in safety instructions to draw the attention to specific hazards: This manual identifies...

 Open the catalog to page 8
Spray gun Mignon 3-9

Hand-held Spray Gun Mignon 3 Qualified personnel Due to their specialised professional training, knowledge, and experience as well as knowledge of the industry-specific standards and regulations, qualified personnel are in a position to perform assigned tasks and to identify and avert potential risks on their own. Specialised personnel Due to their specialised professional training, knowledge, and experience as well as knowledge of the industry-specific standards and regulations, qualified personnel are in a position to perform assigned tasks and to identify and avert potential hazards on their...

 Open the catalog to page 9
Spray gun Mignon 3-10

Operating instructions Ear protection provides protection against hearing damage. Light respiratory protection The light respiratory protection is used as a protection against hazardous dusts. Safety goggles Safety goggles are used to protect the eyes from flying parts and splashes of liquid. Protective gloves Protective gloves protect hands from friction, abrasion, puncture wounds, or deeper injuries, as well as from contact with hot surfaces. Safety shoes [email protected], www.krautzberger.com

 Open the catalog to page 10
Spray gun Mignon 3-11

Hand-held Spray Gun Mignon 3 Safety shoes protect the feet against crushing, falling parts or slipping on slippery ground. Safety helmet The helmet protects the head against injuries from falling parts and oscillating loads as well as in tight spaces.

 Open the catalog to page 11
Spray gun Mignon 3-12

Operating instructions General safety instructions WARNING! Risk of death, risk of injury or property damage due to hazardous media! Potential consequences: The application of hazardous media can lead to death, severe injuries or property damage. When handling hazardous substances, ensure that the current safety data sheets of the hazardous substance manufacturer are available. The necessary measures can be derived from the content of the safety data sheet. Since the hazardous potential of a material can be reassessed at any time due to new lessons learned, the safety data sheet must be checked...

 Open the catalog to page 12
Spray gun Mignon 3-13

Hand-held Spray Gun Mignon 3 Outdoor operation and operation in exterior areas! Use suitable measures to protect the device during the operation from environmental impacts in an exterior area through: - Moisture - UV radiation 3.2 Intended use The hand-held spray gun Mignon 3 is used for the coating of surfaces with liquid to low-viscose coating materials. Typical coating materials are: Paints, dyes, adhesives, glazes, enamels, debonding agents. The intended use also includes the compliance with all the information in this operating manual. 3.3 Predictable misuse Any use beyond the intended...

 Open the catalog to page 13
Spray gun Mignon 3-14

Operating instructions Owner The owner is the person, who directly operates the machine for commercial or economical purposes or who allows a third-party to use/apply it and who is responsible for the legal product stewardship for the protection of the user, the personnel or third parties. Owner responsibilities The machine is used in an industrial environment. The owner of the machine is therefore subject to the obligations as stipulated by the Occupational Health and Safety Act. In addition to the safety information in this manual, the country-specific safety, accident prevention guidelines...

 Open the catalog to page 14

All Krautzberger catalogs and technical brochures

  1. MC 2

    2  Pages

  2. HP 30 2K

    2  Pages

  3. Spray gun Dekor

    45  Pages

  4. Spray gun HS 25

    57  Pages

  5. KHE

    2  Pages

  6. A 20

    2  Pages

  7. RA 6

    2  Pages

  8. A 15 eco

    2  Pages

  9. KS 5

    2  Pages

  10. Coating Systems

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.