- Catalogs
- KraussMaffei
- Side entry robots in the SR series
Side entry robots in the SR series
Side entry robots in the SR series
The document discusses the SR series side entry robots by KraussMaffei, designed for high-speed applications in the medical and packaging sectors. These robots are particularly suited for thin-wall and medical parts production, offering cycle times of less than four seconds.
The SR side entry robots can be installed in two ways: either mounted on a console on the injection molding machine or as an autonomous production cell. This flexibility allows for integration into various production environments.
- High-performance servo drives and robust, low-vibration design for short cycle times.
- Customization for clean-room applications.
- Ideal for thin-wall parts production and environments with low ceiling height.
- SR 80: Maximum payload of 8 kg, axis dimensions X = 500 mm, Z = 2,000 mm, gripper dimensions up to 600 × 800 mm, velocity of 10 m/s, and acceleration of 100 m/s².
- SR 120: Maximum payload of 12 kg, axis dimensions X = 500 mm, Z = 2,500 mm, gripper dimensions up to 700 × 1,200 mm, velocity of 8 m/s, and acceleration of 80 m/s².
- Complete production cells from a single source, including machine, demolding robot, and periphery.
- Easy operation with established KraussMaffei control systems.
- Extremely short cycle times with dry cycle time under 0.4 seconds.
- Cost savings due to reduced mold open times.
- Versatility for different tooling concepts, including single or stack molds.
- Suitable for retrofitting on conventional injection molding machines.
Catalog excerpts
Ideal for the medical and packaging sector Side entry robots in the SR series Engineering Passion
Open the catalog to page 1
Side entry robots in the SR series Fast and efficient Fast and efficient Side entry robot with high-speed performance Technology Installation of the SR side entry robot can be carried out in two different ways: hanging on a console on the injection molding machine or as an autonomous production cell. Highspeed demolding of the parts is ensured through the high dynamic movements of the move-in stroke (movement into mold) and the demolding stroke (movement to mold). Due to the short cycle times, the demolded parts are transferred to a butterfly station by handshake. The SR is now ready for the...
Open the catalog to page 2All KraussMaffei catalogs and technical brochures
Film and sheet extrusion lines24 Pages
Complete system solutions16 Pages
ZE twin-screw extruders30 Pages
Hose extrusion lines16 Pages
AHEAD 201428 Pages
Multiplex Extrusion Lines16 Pages
Pipeheads for polyolefins14 Pages
Archived catalogs
MX injection molding machines20 Pages
Machines in the GX Series26 Pages
- Industrial robot
- Power transmission belt
- Articulated robot
- Making machine
- 6-axis robot
- Floor-mounted robot
- Handling robot
- KraussMaffei extrusion line
- Industrial strip
- KraussMaffei thermoplastic extrusion line
- Automated production line
- Rubber strip
- KraussMaffei extruder
- Compact robot
- Horizontal injection molding machine
- Hydraulic injection molding machine
- Industrial belt
- Packaging robot
- Punching center