1. Catalogs
  2. KRACHT GmbH
  3. Pressure relief valves SPV / SPVF

Pressure relief valves SPV / SPVF

Pressure relief valves SPV / SPVF
1 / 14 PagesView full catalog

Pressure relief valves SPV / SPVF

Product catalog summary
Overview
The document provides detailed technical specifications and operational guidelines for SPV/SPVF direct-operated pressure relief valves, designed for safeguarding low-pressure hydraulic circuits. These valves are suitable for use with various flammable and non-flammable fluids and are compliant with ATEX explosion protection standards.

Construction and Operation
The SPV/SPVF valves are constructed with a housing, sliding piston, compression spring, set screw, bleeding screw, and protective cap. The sliding piston is pressed against an annulated area by the compression spring, separating the pressure connection from the tank connection. The valve opens when the set pressure is reached, allowing fluid flow to the tank connection. The spring chamber is pressure compensated and must be bled during startup.

Installation Notes
- For aerated media, mount the valve vertically with the set screw facing down.
- Avoid underpressure at the tank connection during flow to prevent ventilation issues and noise.
- A special solution (S33) is available if underpressure cannot be avoided.

ATEX Compliance
The valves are suitable for use in explosive environments, including Zone 2 (Gas-Ex, Category 3 G) and Zone 22 (Dust-Ex, Category 3D), among others. They are marked according to the Machine Directive 2014/34/EU and are not an ignition source for gases, vapors, or mists with ignition temperatures above 135°C.

Technical Specifications
- Nominal sizes range from 10 to 80, with maximum flow rates from 40 to 800 l/min.
- Working pressures range from 20 to 30 bar, depending on the nominal size.
- Media temperature ranges vary by design, with some versions supporting up to 220°C.
- Viscosity range is from 1.2 to 1000 mm²/s.

Ordering Information
The document provides examples of ordering codes for different configurations, including pressure stages, ATEX design, type of setting (set screw or knob), and construction codes. Various versions are available, including standard, high temperature, and FKM versions.

Accessories
Welding flanges and other accessories are available for different mounting and connection requirements.

Characteristic Curves
The document includes characteristic curves showing the relationship between set pressure and flow rate for different valve sizes and configurations.
See more

Catalog excerpts

Pressure relief valves SPV / SPVF-2

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Housing Sliding piston Compression spring Set screw Bleeding screw Protective cap Valve Construction The pressure relief valve SPV/SPVF is a direct spring sliding piston valve. It is intended for mounting in pipelines and is suitable to safeguard low pressure hydraulic circuits. The pipe connection is to be effected either by SAE-mounting surfaces (3000 psi) or by Whitworth pipe threads ”G“. The sIiding piston 2 is pressed against the annuIated area a by the compression spring 3. Thus the pressure...

 Open the catalog to page 2
Pressure relief valves SPV / SPVF-3

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated ATEX Explosion protection – Field of application for the pressure relief valves. The valve is used to secure low pressure hydraulic circuits with various flammable and non-flammable fluids. They can be used: a In Zone 2 (Gas-Ex, Category 3 G) in the explosion groups IIA, IIB and IIC b In Zone 22 (Dust-Ex, Category 3D), in the explosion groups III A and III B at non-conductive dusts with a minimum ignition energy >1mJ c In Zone 1 (Gas-Ex, Category 2 G) in explosion groups IIA, IIB and IIC d In Zone...

 Open the catalog to page 3
Pressure relief valves SPV / SPVF-4

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Characteristics Product name / Nominal size Slide valve / directly-operated (Poppet valve on request) Pipe connection / panel mounting Pipe connection Flange connection ISO 6162-1 (SAE J518) Pipe thread ISO 228-1 Fitting position any, pressure setting screw below preferred (see page 2) Housing material Type setting Welding flange SAE (3000 psi) Page 12 Hydraulic fluids Hydraulic oils acc. to DIN 51 524 / 25 (other fluids on request) Nominal size Setting range response pressure p v min pv max Media...

 Open the catalog to page 4
Pressure relief valves SPV / SPVF-5

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated = possible setting range of the pressure stage Flow rate Q [l/min] Durchfluss Q [l/min] Flow rate Q [l/min] Durchfluss Q [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · Web www.kracht.eu

 Open the catalog to page 5
Pressure relief valves SPV / SPVF-6

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] Flow rate QQ [l/min] Durchfluss [l/min] KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · Web www.krac

 Open the catalog to page 6
Pressure relief valves SPV / SPVF-7

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Type Key Ordering example NG 10 ATEX ATEX design Type of setting A Set screw B Knob Construction code (Specfied by KRACHT) Pipe connection 1G Threaded connection G 1/2" Versions A Standard version NBR B High temperature version C22/Cu C FKM version D Soft iron seal E GJS housing NBR F GJS High temperature version C22/Cu K GJS housing with FKM seal L GJS housing with FKM seal, ball seat valve Nominal size 10 Qmax 40 l/min Mounting without specification standard M panel mounting Product name Ordering...

 Open the catalog to page 7
Pressure relief valves SPV / SPVF-8

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Dimensions (in mm) Ordering codes A C SPV 10 E 1G 1 A . K L panel thickness panel thickness adjustable stroke KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · Web www.kracht

 Open the catalog to page 8
Pressure relief valves SPV / SPVF-9

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Type Key Ordering example NG 20 ... 80 ATEX design Pressure stage 02 0.5 ... 2.5 bar 05 2 ... 5 bar 07 2 ... 7 bar (only NG 20…40) 12 4 ... 12 bar 20 10 ... 20 bar 25 19 ... 25 bar (only NG 20…50) 30 20 ... 40 bar (only NG 20/25) 30 15 ... 30 bar (only NG 32…40) Type of setting A Set screw B Knob (on request) Construction code (Specfied by KRACHT) Pipe connection 2F SAE flange 3000 psi 1G Threaded connection G… Versions A Standard version NBR B High temperature version up to +220 °C C FKM version...

 Open the catalog to page 9
Pressure relief valves SPV / SPVF-10

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Dimensions (in mm) Ordering codes A SPVF . C 2F 1 A . E K KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · Web www.kracht

 Open the catalog to page 10
Pressure relief valves SPV / SPVF-11

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Dimensions (in mm) Ordering codes A C SPVF . E 1G 1 A . ATEX K KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · We

 Open the catalog to page 11
Pressure relief valves SPV / SPVF-12

Pressure Relief Valves SPV/SPVF direct operated Pressure Relief Valves SPV, SPVF direct operated Accessoires Welding Flange SAE (3000 psi) max. Weight working pressure bar kg KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · Web www.

 Open the catalog to page 12
Pressure relief valves SPV / SPVF-13

Pressure Relief Valves SPV/SPVF direct operated KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · Phone +49 23 92.935-0 · Fax +49 23 92.935 209 · Email [email protected] · Web www.kracht.eu

 Open the catalog to page 13
Pressure relief valves SPV / SPVF-14

Low and high-pressure gear pumps for lubricating oil, hydraulic, process and test bench applications, fuel and metering systems. I Flow Measurement Gear, turbine and screw type flow meters and electronics for volume and flow, metering and consumption in the chemical industry, hydraulic, process and test bench technology. I Hydraulics Single and multistage high-pressure gear pumps, gear motors and valves for construction machinery, municipal vehicles, agricultural vehicles, special vehicles and truck bodies. I Valves Cetop valves for all requirements stationary and mobile applications. Pressure,...

 Open the catalog to page 14
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.