Series 9000 Density Classifiers Spec Sheet
2Pages

Density Classifiers Spec Sheet • FLAT BOTTOM DENSITY CLASSIFIERS – Tank – rubber lined, all welded formed steel plate construction – Central feed (stilling) well – rubber lined with impact plate & support frame – Full circumference, rubber lined overflow collection flume with ANSI flange discharge outlet – Bolt-on water injection plenum/teeter chamber complete with ANSI flange connection, diffuser plate water distribution system with multiple rubber one-way water nozzles, manual teeter water control valve and mag flow meter – Multiple manual knife gate isolation valves and pneumatic pinch type discharge valves – Underflow discharge control system consisting of a density probe mounted on an adjustable bracket near the overflow of the tank which controls solenoid valves to open/close the discharge valves. All controls including density set point adjustment and monitoring are housed in a NEMA 4 enclosure (Note – the enclosure ships loose for field installation on the unit or adjacent structure) APPROX. LOADING CAPACITIES Lignite / Charcoal Removal from -250 µm (~#60 mesh) Sand Model Size Classification ~ 500 µm (~#35 mesh) Typ. Feed Rate (stph) Approx. Teeter Water Requirements (gpm) @ 40-50 psi Typ. Feed Rate (stph) Approx. Teeter Water Requirements (gpm) @ 40-50 psi DC 11.5 68 – 95 750 150 – A KOLBERG EQUIPMENT SPECIALIST 1687 FOR MORE INFORMATION CALL 1-800-542-9311 AND ASK FOR 190 DC 13.0 NOTE: Specifications are Capacities provided are estimates only and are based on a material S.G. of 2.70. subject to change without notice. Because KPI-JCI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JCI may not necessarily be as illustrated therein. Also continuous design progress makes it necessary that specifications be subject to change without notice. All sales of the products of KPI-JCI are subject to the provisions of its standard warranty. KPI-JCI does not warrant or represent that its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations, including OSHA and MSHA, covering safety, pollution, electrical wiring, etc. Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent upon the area and how the product is used. A safety study should be made by the user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products. Consult factory for specific applications Email: mail@kpijci.com www.kpijci.com

Dimensions (inches) FOR MORE INFORMATION CALL 1-800-542-9311 AND ASK FOR A KOLBERG EQUIPMENT SPECIALIST NOTE: Specifications are subject to change without notice. Because KPI-JCI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JCI may not necessarily be as illustrated therein. Also continuous design progress makes it necessary that specifications be subject to change without notice. All sales of the products of KPI-JCI are subject to the provisions of its standard warranty. KPI-JCI does not warrant...