*mydirectindustry

Catalogs
KPI-JCI
Portable Radial Stacking Conveyor model 2440

Portable Radial Stacking Conveyor model 2440

Product catalog summary

Conveyor Frame: The conveyor features a 24” deep lattice frame.

Idlers: Standard idlers are CEMA B with a 5” diameter. It includes 35-degree troughing idlers on 4’ spacing, 20-degree idlers at the feed point with close spacing, and flat steel return idlers on 10’ spacing.

Undercarriage: Equipped with a manual telescoping pin lock and a single axle with 11:00 – 22.5 tires on swivel wheel boxes.

Receiving Trough: Measures 5’ 6” long with adjustable rubber flashing.

Belt Drive: Features a head end drive with a capacity of 250 TPH for 100 pcf material. It includes a 7.5Hp electric motor, a Class I TA1107 Dodge shaft mount reducer with backstop, V-belt, motor mounts, and guards.

Belt: Composed of 2 ply 220 PIW with 1/8” x 1/16” cover and mechanical fasteners.

Belt Cleaner (Optional): Martin belt cleaner available for the head pulley.

Paint: One coat of primer and a finish coat of beige acrylic.

Physical / Operating Characteristics: Overall length is 40’. Travel length from kingpin to tail is 39’-1”. Travel height is 10’-11”, width is 11’-11”. Feed height is 5’-2”. Maximum discharge height is 14’-4”, and minimum is 11’-4”. Travel weight is 2,400 lbs at the kingpin and 7,800 lbs at the axle.

Stockpile Capacities: Conical pile capacity is 264 tons or 195 yd3. A 1° pile segment holds 9 tons or 7 yd3. A 90° pile holds 1,067 tons or 790 yd3, and a 180° pile holds 1,870 tons or 1,385 yd3.

Options: Includes radial hopper, rock box hopper, oversized rock box hopper, hydraulic drive, self-contained power, AR liners, anchor pivot, undercarriage lift cylinder, 7.5 Hp electric/hydraulic power pack, power travel, pintle hitch, impact idlers, rubber disc return idlers, CEMA C idlers, 3 ply 330 PIW belting, vulcanized belt splice, kingpin, dual tires, travel lights, and air brakes. Options marked with an asterisk are recommended for highway portability.

Additional Notes: Specifications are subject to change without notice. Compliance with safety and regulatory standards is the responsibility of the user. A safety study is recommended before operation.

Catalog excerpts

Portable Radial Stacking Conveyor model 2440-1

Model 11-2440 Portable Radial Stacking Conveyor Series 11 Spec Sheet Conveyor Frame: 24” Deep Lattice Frame Receiving Trough: 5’ 6” long with adjustable rubber flashing. Idlers: All standard idlers are CEMA B – 5” diameter • 35 degree troughing idlers (3 roll) on 4’ spacing • 20 degree idlers (3 roll) at feed point close spacing • flat steel return idlers (single roll) on 10’ spacing Belt Drive: • Head end drive • 250 TPH capacity (100 pcf material). • 7.5Hp - 3/60/230-460 TEFC electric motor. • Class I TA1107 Dodge shaft mount reducer w/backstop • V-belt, motor mounts and guards. • 16” dia., 3/8” grooved head • 14” dia. steel wing tail • 12” Screw take-up Undercarriage: Manual telescoping pin lock. Axle – single axle with single 11:00 – 22.5 tires on swivel wheel boxes NOTE: Specifications are subject to change without notice.

Open the catalog to page 1

Portable Radial Stacking Conveyor model 2440

Portable Radial Stacking Conveyor model 2440

Catalog excerpts

All KPI-JCI catalogs and technical brochures