Model 33-30130 Super Stacker Portable Extendable Radial Stacking Conveyor

Product catalog summary

Conveyor Specifications:
Main conveyor measures 30” x 70’ with an extendable section of 30” x 64’, achieving a total stockpiling length of 130’. The main conveyor frame is 70” deep, while the extendable frame is 54” deep.

Idlers:
Features CEMA B – 5” diameter, 3 roll, 35-degree troughing idlers spaced at 4’, with 20-degree idlers at the feed point spaced at 8’ on flat steel return idlers.

Belt:
Composed of 2 ply 220 PIW with 3/16” x 1/16” covers and mechanical fasteners.

Power:
Maximum capacity of 500 TPH with Class I Dodge shaft mount gear reducers and backstops. Equipped with 3/60/230-460 TEFC electric motors, V-belts, motor mounts, and guards. Both main and extendable conveyors have 20 Hp motors, 425 FPM and 625 FPM speeds respectively, TA-3 reducers, and screw take-up systems.

Under Carriage:
Heavy Duty V-type with hydraulic powered twin cylinder raise and gullwing axle assembly. Includes walking beam travel axle with multiple tires and hydraulic planetary power travel drives.

Receiving Trough and Radial Hopper:
Rock box style hopper measuring 5’ 6” with adjustable rubber flashing.

Hydraulics:
10 Hp electric/hydraulic power pack for undercarriage lift, power travel drives, and extendable conveyor, including all necessary components.

Wizard Touch Automation:
An automated stockpiling control system with a touch screen interface for building various pile types within a specified area.

Electrical:
NEMA 4 enclosure with main disconnect, starters, wiring, and controls for all motors. Requires 460 volt, 3 phase, 60 hertz power.

Options:
Includes impact idlers, rubber disc return idlers, CEMA C idlers, self-training idlers, 3 ply belting, vulcanized belt splice, remote control, additional power travel drives, hydraulic fold-down cylinders, manual landing jacks, material flow switch, and diesel/genset for self-contained power.

Physical / Operating Characteristics:
Overall length when fully extended is 130’. Travel dimensions include a length of 69’-5”, width of 11’-5”, and height of 13’-9”. Feed height is 10’-1”, with discharge heights ranging from 19’6” to 49’. King pin travel weight is 24,345 lbs, and axle travel weight is 35,235 lbs.

Stockpile Capacities:
Capacities vary based on pile type, with fully desegregated conical piles holding 3,314/2,555 tons/yd³ and full piles holding 7,843/5,810 tons/yd³. Other configurations include 1° pile segments and 90° and 180° piles with varying capacities.

Catalog excerpts

Model 33-30130 Super Stacker Portable Extendable Radial Stacking Conveyor-1

Model 33-30130 Super Stacker Portable Extendable Radial Stacking Conveyor Model 33 Spec Sheet t Conveyor: Main conveyor 30” x 70’ with extendable conveyor 30” x 64’ for up to 130’ overall stockpiling length. 70” deep main conveyor frame. 54” deep extendable conveyor frame. Idlers: CEMA B – 5” diameter, 3 roll, 35 degree troughing idlers on 4’ spacing with close-spaced 20 degree idlers at feed point 8’ spacing on flat steel return idlers. Belt: 2 ply 220 PIW, 3/16” x 1/16” covers with mechanical fasteners. NOTE: Specifications are subject to change without notice. Power: 500 TPH maximum capacity (100 pcf material). Class I Dodge shaft mount gear reducers with backstops. 3/60/230-460 TEFC electric motors. V-belts, motor mounts and guards. Main Conveyor Extendable Conveyor 20 Hp 20 Hp 425 FPM 625 FPM TA-3 reducer TA-3 reducer 16” dia., 3/8” grooved head 16” dia., 3/8” grooved head 14” dia. steel wing tail 14” dia. steel wing tail Screw take-up Screw take-up

Open the catalog to page 1