*mydirectindustry

Catalogs
KPI-JCI
Model 11-2450 Portable Radial Stacking Conveyor

Model 11-2450 Portable Radial Stacking Conveyor

Product catalog summary

Conveyor Frame: The Model 11-2450 features a 24” deep lattice frame designed for durability and stability.

Idlers: The conveyor is equipped with CEMA B standard idlers, including 35-degree troughing idlers on 4’ spacing and 20-degree idlers at the feed point for close spacing. Flat steel return idlers are spaced at 10’ intervals.

Undercarriage: It includes a manual telescoping pin lock and a single axle with 11:00 – 22.5 tires on swivel wheel boxes.

Receiving Trough: The trough is 5’ 6” long and features adjustable rubber flashing for material handling.

Belt Drive: The head end drive supports a capacity of 250 TPH with a 10 Hp electric motor. It includes a Class I TA2115 Dodge shaft mount reducer with a backstop, V-belt, motor mounts, and guards.

Belt: The conveyor uses a 2 ply 220 PIW belt with mechanical fasteners.

Belt Cleaner (Optional): A Martin belt cleaner can be installed on the head pulley.

Paint: The equipment is coated with one coat of primer and a finish coat of beige acrylic.

Physical / Operating Characteristics: The conveyor has an overall length of 50’, a travel height of 12’-2”, and a maximum discharge height of 17’-5”. It has a travel weight of 2,700 lbs at the kingpin and 7,800 lbs at the axle.

Stockpile Capacities: The conveyor can handle conical piles of 474 tons, 1° pile segments of 16 tons, 90° piles of 1,956 tons, and 180° piles of 3,438 tons.

Options: Various options are available, including radial hoppers, hydraulic drives, self-contained power, and additional safety features for highway portability.

Compliance and Safety: Users are responsible for ensuring compliance with safety regulations and installing necessary safety devices before operation.

Catalog excerpts

Model 11-2450 Portable Radial Stacking Conveyor-1

Model 11-2450 Portable Radial Stacking Conveyor Series 11 Spec Sheet Conveyor Frame: 24” Deep Lattice Frame Receiving Trough: 5’ 6” long with adjustable rubber flashing. Idlers: All standard idlers are CEMA B – 5” diameter • 35 degree troughing idlers (3 roll) on 4’ spacing • 20 degree idlers (3 roll) at feed point close spacing • Flat steel return idlers (single roll) on 10’ spacing Belt Drive: • Head end drive • 250 TPH capacity (100 pcf material). • 10 Hp - 3/60/230-460 TEFC electric motor • Class I TA2115 Dodge shaft mount reducer w/backstop • V-belt, motor mounts and guards • 16” dia., 3/8” grooved head • 14” dia. steel wing tail • 12” Screw take-up Undercarriage: Manual telescoping pin lock. Axle – single axle with single 11:00 – 22.5 tires on swivel wheel boxes NOTE: Specifications are subject to change without notice.

Open the catalog to page 1

Model 11-2450 Portable Radial Stacking Conveyor

Model 11-2450 Portable Radial Stacking Conveyor

Catalog excerpts

All KPI-JCI catalogs and technical brochures