Attrition Cells Spec Sheet • ATTRITION CELL - Heavy duty rubber lined tank designed to minimize vortexing, back-mixing, short circuiting and dead zones. Round tank with baffles on the Model #AC 900-1 and hexagonal tank(s) on the Model #AC 2100-2 and - Access ports with bolt-on covers - High speed, rubber lined, oppositely pitched turbines. Twin impellar blades on the Model #AC 900-1 and triple Custom turbine designs available - consult factory - _HP, TEFC, 3/60/230-460 heavy duty drive assembly with Faulk direct coupled right angle gear POWER REQUIREMENTS & APPROX CAPACITIES FOR MDRE INFORMATION CALL 1-800-542-9311 AND ASK FOR A KOLBERG EQUIP/VENT SPECIALIST NOTE: Specifications are subject to change without notice. Because KPI-JCI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JCI may not necessarily be as illustrated therein Also continuous design progress makes it necessary that specifications be subject to change without notice All sales of the products of KPI-JCI are subject to the provisions of its standard warranty KPI-JCI does not warrant or represent tfiat its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations including OSHA and MSHA. covering safety, pollution, electncal wiring, etc Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and ttie use to which ttie product is put by the user In some photographs, guards may have been removed for illustrative purposes only This equipment should not be operated without all guards attached in ttieir normal position Placement of guards and other safety equipment is often dependent upon the area and how the product is used A safety study should be made by Ihe user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products_ Email: [email protected]