- Catalogs
- KOVOSVIT MAS, a.s.
- MCV 800 quick
MCV 800 quick
MCV 800 quick
- Equipped with linear rolling guides and direct measuring for all axes, enhancing precision.
- Extended X-axis starting point of 800 mm for improved reach.
- Compact design with reduced spatial requirements and enhanced ergonomics.
- Innovative kinematic configuration of the cross-table increases static rigidity.
- New machine variant includes a worm chip conveyor, reducing machine length by 1200 mm compared to a link conveyor.
- Increased number of clamping grooves on the table for better versatility.
- Control systems include Heidenhain TNC620 and Siemens 828D.
- Innovated spindle design reduces noise and increases maximum revolutions to 12,000 min-1.
- Table clamping surface: 1000 × 500 mm with 5 T-slots.
- Maximum workpiece weight: 500 kg.
- Spindle taper: ISO 40 with a maximum speed of 12,000 min-1.
- Spindle motor power: 10 kW (S1) / 14 kW (S6 - 40%).
- Spindle motor torque: 63 Nm (S1) / 88 Nm (S6 - 40%).
- Rapid feed rate: 30,000 mm/min; Working feed rate: 15,000 mm/min.
- Ball screw diameter: 32 mm with a pitch of 10 mm/rpm.
- Machine dimensions: Length 2086 mm, Width 2745 mm, Height 2420 mm, Weight 4000 kg.
- Tool magazine with 24 positions, max tool diameter of 80 mm (all positions occupied) or 120 mm (with neighboring position skipping).
- Max tool length: 250 mm; Max tool weight: 6.5 kg; Max tool weight in magazine: 65 kg.
- Tool change time: 3.8 seconds.
- General tolerances according to ISO 2768 - mH.
- Welding quality according to ISO 5817 - C.
- Welding wire according to ISO 14341 - G3Si.
- KOVOSVIT MAS, a.s., náměstí Tomáše Bati 419, 391 02 Sezimovo Ústí, Czech Republic.
- Phone: +420 381 632 202; Fax: +420 381 633 570; Email: [email protected].
- MAS service center: +420 381 74 74 74.
Catalog excerpts
MCV 800 quick Vertical machining center
Open the catalog to page 1
MCV 800 Vertical machining center | www.kovosvit.cz Main features of the machine — Linear rolling guides with direct measuring of all axes — Increased starting of X axis = 800 mm — Small built-up machine area, improved ergonomics ⇒ lower spatial requirements — Innovation of kinematic configuration of cross-table ⇒ Increased static rigidity of load-bearing structure — New developed machine variant with worm chip conveyor ⇒ compactness (machine length decreased by 1200 mm as compared to link conveyor) — Increased number of clamping grooves on the table — Heidenhain TNC620, Siemens 828D control...
Open the catalog to page 2
Machine dimensions Tool magazine Machine dimensions Pneumatic equipment Feed rate Maximum drilling diameters (motor 10 kW) Main dimensions Table clamping surface Number of table T-slots Table T-slots width and spacing Largest table track length (X) Largest slide track length (Y) Largest spindle track length (Z) Maximum workpiece weight (table load) Max. workpiece dimension for max. tool length Drilling full diameter to steel of strength 600 MPa with drill bit from RO Drilling full diameter to steel of strength 600 MPa with drill bit mm Thread diameter with cutting to steel with strength 600 MPa...
Open the catalog to page 3
KOVOSVIT MAS, a.s. náměstí Tomáše Bati 419, 391 02 Sezimovo Ústí Czech Republic T: +420 381 632 202 F: +420 381 633 570 E: [email protected] MAS service center: +420 381 74 74 74
Open the catalog to page 4All KOVOSVIT MAS, a.s. catalogs and technical brochures
MASTURN Line 550i / 820i12 Pages
SP Line 430 / 1100 | 430 / 250016 Pages
SP Line12 Pages
KL 4352 Pages
MMC Line12 Pages
MCV BaseLine2 Pages
MCV Line20 Pages
MCV 800 Clever4 Pages
turning4 Pages