• Equipped with linear rolling guides and indirect measuring for all axes.
• Extended X-axis starting point of 800 mm.
• Compact design with improved ergonomics, reducing spatial requirements.
• Innovative kinematic configuration of the cross-table enhances static rigidity.
• New variant includes a worm chip conveyor, reducing machine length by 1200 mm compared to a link conveyor.
• Increased number of clamping grooves on the table.
• Control systems available: Heidenhain TNC620 and Siemens 828D.
• Innovated spindle with reduced noise and increased maximum revolutions to 9,000 min-1.
• Standard accessories include manual airblast, rinsing, headstock light, and tool air blast.

• Table dimensions: 1000 × 500 mm with a maximum weight capacity of 600 kg.
• Working range: X-axis 800 mm, Y-axis 500 mm, Z-axis 550 mm.
• Spindle taper: ISO 40 (7:24) with a maximum speed of 9,000 min-1.
• Feed rate: Working feed rate of 15 m/min and rapid traverse of 30 m/min for X, Y, Z axes.
• Tool magazine capacity: 24 tools, with a maximum tool length of 250 mm and diameter of 80 mm (120 mm with adjacent stations empty).
• Spindle motor output: 7.5 kW (S1) / 10.5 kW (S6 - 40%).
• Nominal torque: 48 Nm (S1) / 74 Nm (S6 - 40%).
• Positioning accuracy: 0.012 mm, repeatability accuracy: 0.005 mm.
• Machine dimensions: 2086 × 2749 × 2470 mm, weight: 4,000 kg.

KOVOSVIT MAS, a.s., náměstí Tomáše Bati 419, 391 02 Sezimovo Ústí, Czech Republic. Phone: +420 381 632 202, Fax: +420 381 633 570, Email: [email protected], MAS service center: +420 381 74 74 74.