G-Star Endmil

Product catalog summary

Introduction
KORLOY has introduced the G-Star Endmill, designed specifically for machining low hardness steel (HRC10~30) such as alloy steel, carbon steel, and pre-hardened steel. This tool is suitable for both rough machining and finishing, as well as for working on curved and sloped surfaces.

Specifications and Features

Optimal Cutting Performance: The rake angle is optimized for low hardness workpieces, enhancing cutting efficiency.
Chipping Resistance: The high toughness substrate reduces chipping, improving durability.
Wear Resistance: TiAlN coating increases oxidation and chipping resistance, extending tool life.
Economical Tool Cost: Offers high performance and quality at a cost-effective price.

Product Line-Up

Various types including ball nose, flat, and radius endmills with different flute numbers and helix angles.
Tool diameters range from 1 to 20 mm, with shank diameters from 4 to 20 mm.

Performance Evaluation

The G-Star Endmill shows a 30% improvement in chipping resistance compared to competitors, with a 100% tool life performance in tests on carbon steel.

Safety Recommendations

Use protective gloves and safety glasses to prevent injuries from sharp edges and hot chips.
Ensure workpieces are securely clamped to prevent movement during machining.
Manage tool changes carefully to avoid breakage under excessive load or wear.
Prepare fire prevention measures when using non-water soluble cutting oils.

Contact Information
For further inquiries, KORLOY provides contact details for their offices in the USA, Germany, India, Brazil, Chile, Russia, Mexico, Turkey, and Korea.

Catalog excerpts

KORLOY TECH-NEWS - English Suitable for low hardness Steel (HRC10~30): Alloy steel, Carbon steel, Pre-harden steel etc. ҁ General purpose suitable for rough machining, finishing and curved and sloped surfaces

Open the catalog to page 1

KORLOY launched G-Star Endmill for low hardness Steel (HRC10~30). G-Star has various shapes and line-up for cutting special shapes. G-Star Endmill has rake angle for low hardness workpieces is designed for optimal performance in cutting. In addition its high toughness substrate has improved chipping resistance and high machinability. The TiAlN coating maximizes tool life due to increasing oxidation resistance and chipping resistance. KORLOY provides an economical tool, G-Star Endmill for you to achieve your economical tool usage. Optimal cutting performance Higher chipping resistance - Rake angle...

Open the catalog to page 2

KORLOY TECH - NEWS Length/shank type D : Dynamic Z : G-Star Endmill T : Thunder 20/30 : Straight 21/31 : Standard 22/32 : Long cutting length 23/33 : Long shank 24/34 : Tapered neck B : Ball E : Flat R : Radius X : Flat S : Flat XB : Ball Excellent rake angle and cutting edge considered the characteristics of workpiece Improved chipping resistance and enhanced machinability by using high toughness materials TiAlN coating for enhanced oxidation resistance and chipping resistance Excellent workpiece finishes by 45° high helix angle Tool selection guide A-Star Endmill D Endmill U-Star Endmill G-Star...

Open the catalog to page 3

Performance evaluation Chipping resistance Workpiece Cutting condition 30% improved chipping resistance Tool life (%) Line-up Type Product name 2 flutes ball nose Endmill 2 flutes tapered neck type ball nose Endmill 2 flutes short shank flat Endmill 4 flutes short shank flat Endmill 2 flutes long flat Endmill 4 flutes long flat Endmill 2 flutes flat Endmill 4 flutes flat Endmill 4 flutes 45° helix flat Endmill 2 flutes short shank ball nose Endmill 4 flutes short shank ball nose Endmill 2 flutes long ball nose Endmill 2 flutes long shank ball nose Endmill 2 flutes ball nose Endmill 4 flutes ball...

Open the catalog to page 4

For the safe metalcutting Use safety supplies such as protective gloves to prevent possible injury while touching the edge of tools. Use safety glasess or safety cover to hedge possible dangers. Inappropriate usage or excessive cutting condition may lead tool's breakage or even the fragment's scattering. Clamp the workpiece tightly enough to prevent its movement while its machining. Properly manage the tool change phase because the inordinately used tool can be easily broken under the excessive cutting load or severe wear, and it may threat the operator's safety. Use safety cover because chips...

Open the catalog to page 5

G-Star Endmil

G-Star Endmil

Catalog excerpts

All KORLOY catalogs and technical brochures