KORLOY TECH-NEWS - English Endmill for Aluminum machining ҁ ҁ Suitable for Aluminum, Aluminum alloy and Non-ferrous materials Various specifications in the line such as ball, single flute and roughing etc. for wide range in machining

Endmill for Aluminum machining KORLOY launched A-Star Endmill for effective Aluminum and Non-ferrous material machining. Its sharp cutting edge and mirror like helix flute prevent troubles in cutting with good chip evacuation. A-Star Endmill is designed for cutting various shapes such as ball, flat, radius and so on. Its special cutting edges like single edge, roughing, and etc. can be used in numerous ways. A-Star Endmill’s substrate is composed with good wear resistance and chipping resistance carbide and there is possibility to increases the features with DLC coating. The A-Star Endmill is...

KORLOY TECH - NEWS A-Star Endmill Length/shank type 30/50 : Stub length 31/51 : Regula length 32/52 : Long length B : Ball E : Flat R : Radius F : Roughing Corner radius Sharp cutting edge considered the characteristics of workpiece High deposition resistance and enhanced chip emission through the surface of a mirror in the groove Tool selection guide A-Star Endmill D Endmill U-Star Endmill G-Star Endmill S-Star Endmill Super Endmill For Ti Carbon steel, Alloy steel Cast iron Stainless steel Super Endmill For Ti Super Endmill For HRSA H-Star Endmill S-Star Endmill Composite Router Endmill High...

Applications [ Case study ] Copper Tool life (%) Non-ferrous materials Alloy steel Aluminum alloy A-Star Endmill [ A-Star Endmill ] 2 flutes ball nose Endmill 1 flutes flat Endmill 2 flutes flat Endmill 3 flutes flat Endmill 2 flutes radius Endmill 3 flutes radius Endmill 2 flutes radius Endmill 3 flutes radius Endmill 3 flutes roughing Endmill Product name

For the safe metalcutting Use safety supplies such as protective gloves to prevent possible injury while touching the edge of tools. Use safety glasess or safety cover to hedge possible dangers. Inappropriate usage or excessive cutting condition may lead tool's breakage or even the fragment's scattering. Clamp the workpiece tightly enough to prevent its movement while its machining. Properly manage the tool change phase because the inordinately used tool can be easily broken under the excessive cutting load or severe wear, and it may threat the operator's safety. Use safety cover because chips...