Catalogs >
Korenix Technology >
JetNet 7014G

JetNet 7014G
11Pages

Catalog excerpts

A Bcijcr Electronics Group Company INDUSTRIAL GIGABIT ETHERNET SWITCH The JetNet 7014G is an pure Gigabit industrial Ethernet Switch with 10 ports RJ-45, 4 ports Gigabit SFP socket for optical fiber network connection. It adopts high efficiency Ethernet MAC controller with 40Gbps Switch fabric bandwidth, 9K jumbo frame forwarding and powerful Layer-3 IP routing capability. The robust system design makes the JetNet 7014G survive under harsh outdoor environment with extreme electric magnetic interference and the variation of environment temperature. The hardware switching basis Layer-3 Routing features enabled the IP based packet forwarding with high performance, low latency and security. It provides your network infrastructure with great performance and safety with network access control, and handle burst packet with smart buffer management for IP surveillance in real infrastructure. Heavy Industrial r\ Features ► 10 Gigabit Ethernet RJ-45 ports ,4 Gigabit SFP ports ► 1000Mbps Fiber Connection with DDM function ► Non-Blocking, High Speed Network Switching Fabric ► Network Redundancy - MSR (Multiple Super Ring),ITU-T G.8032 ERPS, RSTP, MSTP, Super Chain ► Fully Device Management - SNMP v1 /v2c/v3, RMON, Web UI, Telnet and Local Console ► Friendly Device and Network Topology recovery utility - Korenix View, Korenix NMS ► Advanced Cyber Network Security -MAC security, IEEE 802.1x Port Based access control , IEEE 802.1x Radius Server authentication, 802.1x MAB, Distributed Denial of Service (DDoS), IP Source Guard, Denial of ARP Inspection ► Layer 2 Network Performance - IEEE802.1Q VLAN, Private VLAN, Trunk, Packet Filtering, DHCP Server/Client, Traffic Prioritize, Rate Control ► Layer 3 Network Routing Protocols - RIP v1 /v2, OSPF, VRRP, IP Multicasting ► Hardware Watchdog for System Auto-Recovery ► High Level Electromagnetic interference immunity ► IP Surveillance solution with NEMA-TS2 characteristic ► Railway T rack Side EN50121 -4 compliance ► High Operating Temperature - -40~75°C ► Redundant wide range power input- DC 10~36V Korenix Technology

Open the catalog to page 1

High Performance Data Acquisition The Ethernet Switch designed with high port density interface for field data acquisition, and exchange with data center. With the highest Switch Fabric and data buffer, the JetNet 7014G approached seamless connective for field and center offered 9Kbytes packet forwarding ability and excellent burst stream management technology to enable highest network performance. Flexible Uplink Media for Network Architecture Extension In the metro network architecture, the optical fiber is commonly to use for uplink connection. The JetNet 7014G supports 4 SFP interfaces...

Open the catalog to page 2

Rapid Super Ring (RSRTM )Technology The Rapid Super Ring (RSRTM) technology provides advanced Ring Redundancy Technology, its shortest recovery time is from 50ms to few mini second for Fast Ethernet copper/fiber rings, and the Ring-Master (R.M.) can be auto-selected by RSRTM engine. One of Ring path of R.M. is primary path, the other is block path for standby. Once the primary path failed, the 2nd path will be recovered within few mini second. Besides, the restoration time is shortened to zero in R.M. auto-selection mode. Rapid Dual Homing (RDHTM) Technology The Rapid Dual Homing (RDHTM) is...

Open the catalog to page 3

MultiRing Technology The MultiRing™ provides easier connectivity between two or more ring networks. The simplest sample is to connect two rings by single device. User can extend the network by linking multiple rings into a line or multiple directions. The MultiRing™ has great diversity of various ring technology, when MutliRing™ enabled, the Switch can connect TrunkRing™, RSR™ together and simultaneously provide more high speed ring connectivity. It provides extensibility while keeping the great compatibility. Super Chain Technology The Super Chain is a new Ring technology that provides a...

Open the catalog to page 4

ITU-T G.8032 ERPS The ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) is an ring technology defined by ITU-T. It include 2 version ring protocols, ERPS v1 and v2. The v1 supports single ring , and v2 is based on VLAN concept to construct comprehensive ring architecture that engaged several major rings and sub ring. The ERPS protocol is similar as MSR technology with one major host –RPL Owner and several of RPL nodes. The ring restoration and recovery time of ERPS is smaller than 50ms, and slow than MSR. However, the ERPS is an open Ethernet ring redundant protocol that enabled...

Open the catalog to page 5

IP Source Guard (IPSG) IP Source Guard is a security feature that restricts IP traffic on untrusted Switch port by filtering traffic Switch drops packet from untrusted port with cloned IP /MAC database or manually configured IP source bindings. This feature helps prevent IP spoofing attacks when a host tries to spoof and use the IP address of another host. Denial of Service (DoS) Prevention In or Distributed Denial-of-service (DDoS) attack is an Zombie-A attempt to make a computer or network resource unavailable managed Ethernet Switch, the attacker may send lot of service inquire packets...

Open the catalog to page 6

The JetNet 7014G adopts excellent heat dissipation design to operating in -40~75°°C environment , and also supports high grade EMC protection to bear those out-door applications. The switch can be located at harsh environment with extreme temperature and interference of electric noise. Level-3 Testing Severity Surge /Lighting Attack 2KV at Power, Ethernet Level-3 Testing Severity Electric Transient 2KV at Power, Ethernet Level-3 Testing Severity Railway Track Side Compliance EN50121-4 Layer-3 Routing - Accelerates Data Stream in Complex-Network The Routing is the process of moving...

Open the catalog to page 7

Korenix Technology

Open the catalog to page 8

Korenix Technology

Open the catalog to page 9

Power- Chassis GND/Housing: AC 1KV/DC 1.4KV Regu latory Approvals Railway Application Rolling Stock Track Side EN50121-4 EMC EMI: IEC/EN61000-6-2, Compliance with EN50121-1/-4 , CE class A, FCC sub part-15 class-A EMS: IEC/EN61000-6-4, Compliance with EN50121-1/-4, EN61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-9 Vibration & Shock Compliance with IEC 61373 * Note-1: ITU-T ERPS V2 (By Request) * Note-2: Cyber Security (By Request) 2E Left Side View Bottom View Korenix Technology

Open the catalog to page 10