Catalogs >
Korenix Technology >
DS_JetWave3220

DS_JetWave3220
5Pages

Catalog excerpts

Industrial Dual 802.11n 2.4G/5G 2T2R MIMO Wireless AP Dual Radio Configurable: 802.11 a/b/g/n/ac and 2.4G/5G Band 802.11n 2T2R MIMO doubles data rate up to 866Mbps per radio Rugged M12 anti-vibration connector for vehicle installation (3220-M12 V3) Support IPsec, OpenVPN LAN/Wireless Link Fault Pass-Through Dual Radio Bridge and Redundancy LAN/WAN/WIFI Bridging and Routing Korenix View, SNMP, Korenix NMS Controller-Based Central Management Industrial IP31 Aluminum Housing Gigabit PoE+ power input DC24V(12~48V) Redundant DC Power Input, DI + DO JetWave 3220 V3: Dual 802.11n 2.4G/5G 2T2R MIMO Radio with Dual Gigabit Ethernet JetWave 3220-M12 V3: Dual 802.11n 2.4G/5G 2T2R MIMO Radio with Dual Gigabit Ethernet M12 Connector Overview The JetWave 3220 series is an industrial 802.11n/ The JetWave 3220 series can function as an AP/CPE, a/b/g/ac Wireless AP which offers a high performance WDS modes for different point to point or point to and reliability wireless solution for both 2.4G and 5G multiple point network applications. The additional radio band. With the JetWave 3200 series wireless Routing mode allows to separate the LAN and WLAN to access point, a network designer will easily achieve the different IP subnet, and perform NAT routing. The integration of wired and wireless networks. advanced features include LAN to WLAN Link Fault With the new generation 802.11ac MIMO technology, Pass-Through, Dual Radio Bridging and Redundancy, the multi-radio offers a high data rate of up to high speed gigabit Ethernet transmission, Wireless QoS 866Mbps per radio, provide flexible wireless backbone (WMM) and complete wireless security and packet deployment options, and provide the redundant wireless connections to increase the reliability of the The JetWave 3220 series is an industrial grade design entire wireless network. The JetWave 3220-M12 series with the significant features of gigabit PoE+, dual equips with dual Gigabit Ethernet M12 anti-vibration 24V(12~48V)DC power input, IP31 Housing and Digital connector for vehicle installation Input/Output. The design of the EN50121-4 approved For secure remote connectivity, JetWave 3220 V2 and wide operation temperature design allows users to supports IPsec and OpenVPN. All packets transferred in install the device under harsh environmental VPN tunnel are encrypted and sensitive data are secured. JetWave 3220 V3 and Korenix WLAN controller compose solution-based wireless network. All wireless networks provided by JetWave 3220 V3 APs are central managed for fast deployment, roaming performance and immediate configuration changes. Korenix T

Open the catalog to page 1

Wireless Redundancy JetWave 3220 V3 supports two Wifi interfaces that can be configured as 802.11a/g/n/ac and 2.4/5G band. By connecting the two Wifi interfaces to the same peer, the two links backup with each other. Users can assign primary link on one interface and backup link on the Secure Remote Connection: IPsec & OpenVPN VPN connectivity is typical application in JetWave devices. JetWave 3220 V3 supports IPsec for point-topoint VPN tunnel and OpenVPN tunnel from filed site to control center. All packets transferred in VPN tunnel are encrypted and sensitive data are secured....

Open the catalog to page 2

Optional Accessory - Celling Mounting Kit Optional Accessory - Antenna Mounting Kit Korenix Technology

Open the catalog to page 3

Standard Wireless: IEEE 802.11a/b/g/n/ac for Wireless LAN IEEE 802.11 i Wireless Security Ethernet: IEEE 802.3 for 10BaseT IEEE 802.3u for 10/100Base-TX IEEE 802.3ab for 1000BaseT IEEE 802.3at for Power over Ethernet plus IEEE 802.1D Spanning Tree Protocol IEEE 802.1Q for VLAN Highest Data Rate: IEEE 802.11a, g: 54 Mbps IEEE 802.11n: 300Mbps @ 40MHz Interface Ethernet Port 2x 10/100/1000Base-T RJ-45 (JetWave 3220 V3) 2x 10/100/1000Base-T M12 (JetWave 3220-M12 V3) IEEE 802.3at PoE+ Complaint in Ethernet Port 1 Power Input 4-pin socket for Dual DC Input Digital Input/ 1x Digital Input, 0: +3V...

Open the catalog to page 4

Approvals Enclosure Antenna connector Mounting Dimension Weight IP31 protection Reverse SMA Din-Rail, Wall-Mount, Celling-Mount (Option Accessory) 149 mm(H) x 120.6 mm(D) x 74 mm(W) 1.5 kg with package, without optional accessary Certification CE RED CE EN55022/55024 EN 301 489-1/17 EN 301 893 V1.7.1 EN 300 328 V1.8.1 Safety EN60950-1 FCC Part 15B Class A Railway Option Accessory Celling Celling Mounting Plate, Used for Celling-/Wall- Mounting mounting, Dimension: 156x117x22mm External Antenna Mounting L Plate Antenna Extended Radio Cable: RG316 Cable, L=90cm, SMA Mounting Kit Male Reverse...

Open the catalog to page 5