DS_JetNet5010G_V1.1
9Pages

{{requestButtons}}

Catalog excerpts

DS_JetNet5010G_V1.1 - 1

◄ Industrial L2 / L3 Rackmount / Rail Ethernet Switch I JetNet 5010G / 5010G-wIndustrial 7+3G Gigabit Managed Ethernet Switch cc ps <®~ X RoHS LISTED ■ 7 10/100Base-TX and 3 Gigabit RJ-45/SFP combo ports (10 / 100 / 1000 Base-T, 100 Base-FX, 1000 Base-X) ■ SFP ports support 100/1000Mbps Fiber with Digital Diagnostic Monitoring (DDM) to monitor long distance fiber quality ■ 32Gbps Non-Blocking, switch backplane 8K MAC address table ■ IEEE 802.1s MSTP, RSTP and Multiple Super Ring (Rapid Super Ring, Dual Homing, MultiRing, TrunkRing) for network redundancy ■ Advanced management by 256 VLAN, Private VLAN, QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring ■ Supports LLDP and Korenix NMS software for auto-topology visualization and efficient group management ■ Supports Modbus TCP/IP for FactoryAutomation ■ Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH for remote management ■ Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, 802.1x network access control ■ Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output ■ Dual 10.5~60VDC power inputs ■ IP31 rugged aluminum case ■ -25~70oC (JetNet 5010G), -40~75oC (JetNet 5010G-w) operating temperature Industrial Intelligent NMS Gigabit Managed Switch Managed Ethernet Switch Entry-level Switch Wireless OutdoorAP Embedded PoE/Router Computer (LINUX) | Overview The JetNet 5010G is a Managed Industrial Ethernet Switch, equipped with 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45/100-FX/Gigabit SX/LX combo ports. The 2 gigabit ports are used to form the nonstop Rapid Super Ring. The 3rd gigabit port is used to connect to upper switch, to couple ring or public server. The gigabit combo port design gives the flexibility to choose copper or fiber media, 100Base-FX or 1000Base-X, multi-mode or Single-Mode for different distance application,need of without stocking different switch models. The JetNet 5010G is designed as rugged surface in aluminum material with curvilineal heating dispersing mechanical design and wide operating temperature. The embedded software supports full Layer 2 management features, MSTP, RSTP, multiform ring redundancy, network control, monitor, security and notification. The JetNet 5010G also provides built-in watchdog timer, digital input and relay output to avoid undetected damage. With JetNet 5010G, you can fulfill the dream of having the perfect solution to construct your industrial Ethernet infrastructure. Industrial Communication Computer (WIN/LINUX) Ethernet/PoE/ Serial Board Media Converter Serial Device Server Din Rail Power Supply A Beijer Electronics Group Company

Open the catalog to page 1
DS_JetNet5010G_V1.1 - 2

3rd Gigabit Uplink for Flexible Network Planning JetNet 5010G offers three Gigabit RJ-45/SFP combos which improve the performance dramatically compared to typical two Gigabit RJ-45/ SFP combos. Each combo comes with flexible connectivity, 100Mbps Single-Mode/ other network Gigabit Rapid Super Ring as well as a copper connection. Now, end-users can achieve as many as 10 different combinations of port connections. Also, by selecting a suitable range of fiber transceivers, the JetNet5010G can fulfill your industrial applications at long distances. 100 / 1000Mbps DDM Transceiver for High...

Open the catalog to page 2
DS_JetNet5010G_V1.1 - 3

Industrial L2 / L3 Rackmount / Rail Ethernet Switch TrunkRingTM Symmetric TrunkRingTM Asymmetric TrunkRingTM TrunkRingTM is a new feature in MSRTM which merges the two technologies of RSR and link aggregation. It takes advantage of aggregation to enhance the link redundancy, while increasing the link speed. The ring Symmetric TrunkRingTM will open only if all the aggregated links are broken. Link JetNet 5010G aggregation can be achieved by either, static trunk or Rackmount PoE Plus Switch Industrial PoE Plus Switch LACP protocol. Not all the link sections in a TrunkRing need to be the same....

Open the catalog to page 3
DS_JetNet5010G_V1.1 - 4

Rapid Dual Homing (RDH TM) Technology Rapid Dual Homing (RDHTM) replaces DualHoming II and Standbys by their link speed. The uplink with the and can be used for ring coupling. While keeping easy highest speed is more likely to be the active path for configuration and multiple redundancies, the failover data transmission. Link aggregation is also integrated time is much faster (less than 50 ms) and the restore into RDHT M. An uplink can be a link or several links time is ZERO (seamless restoration). Uplinks can aggregated as a trunk, which provides better redundancy be auto detected and...

Open the catalog to page 4
DS_JetNet5010G_V1.1 - 5

| Port Security Port Security is an enhanced security feature provided by JetNet 5010G. Port Security is also known as, “Port and MAC Binding”. Users can bind a specific MAC address to a specific port, add the MAC and Port binding entry/entries to the port security table. After enabling this, only the PC with the available MAC address can access the network through the switch. The other PCs can’t even pass the traffic through the port. Industrial Intelligent NMS Port Security Table Gigabit Managed Switch | A Built-in Watchdog Timer With a Built-In Watchdog Timer, the JetNet 5010G performs a...

Open the catalog to page 5
DS_JetNet5010G_V1.1 - 6

LLDP and Korenix NMS for Auto Topology Visualization The Link Layer Discovery Protocol (LLDP) was formally In industrial environments, most vendors provide their ratified as IEEE 802.1AB-2005. LLDP is the Layer 2 own discovering protocols, window utility or other tools protocol that allows the network device/station to to manage their switches. The LLDP protocol fixes the advertise connectivity & management information, the interoperability among them. With LLDP supported, identity & major capabilities. If receives and establishes users can easily browse the network devices and network...

Open the catalog to page 6
DS_JetNet5010G_V1.1 - 7

◄ Industrial L2 / L3 Rackmount / Rail Ethernet Switch JetNet 5010G Appearance LEDs SFP8-10, RJ458-10 LEDs Power, DI, DO, R.M. Reset Console Industrial Intelligent NMS Dimension (Unit = mm) Rackmount PoE Plus Switch Power Input, Digital In Digital Output A Beijer Electronics Group Company Gigabit Managed Switch Managed Ethernet Switch Entry-level Switch Wireless OutdoorAP Embedded PoE/Router Computer (LINUX) Industrial Communication Computer (WIN/LINUX) Ethernet/PoE/ Serial Board Media Converter Serial Device Server SFP Moduie Din Rail Power Supply

Open the catalog to page 7

All Korenix Technology catalogs and technical brochures

  1. JetNet 5210G

    5 Pages

  2. JetNet 5810G

    5 Pages

  3. JetNet 3008

    3 Pages

  4. JetNet 7020G

    5 Pages

  5. JetNet 5310G

    8 Pages

  6. JetWave 2450

    3 Pages

  7. JetNet 5020G

    10 Pages

  8. JetCon 2301S

    4 Pages

  9. JetNet 7014G

    11 Pages

  10. Korenix NMS

    3 Pages

Archived catalogs