Catalogs >
Korenix Technology >
DS JetNet 6059G

DS JetNet 6059G
10Pages

Catalog excerpts

JetNet 6059G / 6059G-w Industrial 9-port Gigabit Managed Ethernet Switch 4 Gigabit copper ports, 5 Gigabit copper/SFP combo ports to extend Giga Copper/Fiber uplink or redundant Ring connection Industrial 5G Fiber Switch SFP ports support 100/1000 Fiber with Digital Diagnostic Monitoring Independent SFP Link speed indication 32G bps switch Fabric, 8K MAC address to ensure High Quality Data transmission Isolated RS-232 Console port for negative power system Korenix MSR pattern aggregates up to 4 x 1000M Rings for critical data stream redundancy Supports LLDP and optional Korenix NMS software for network Supports Modbus TCP/IP for Factory Automation Advanced management by LACP/256 VLANs/GVRP/QoS/IGMP Snooping/Rate Control/ Online Multi-Port Mirroring/DHCP option 82 Advanced Security system by Port Security, Access IP list, SSH and HTTPS Login Private VLAN, QinQ Cisco-Like CLI, Web, SNMP, RMON for network Management o Dual redundant 10.5~60VDC power inputs for system reliability Hi-pot isolation and -25~70oC (JetNet 6059G), -40~75oC (JetNet 6059G-w) operating temperature for harsh environments Overview JetNet 6059G series is an Industrial Gigabit Managed management and security features, such as LLDP and switching backplane to ensure high quality data Korenix NMS, 4 QoS, 256 VLAN, IGMP Snooping, transmission in industrial applications requiring high- DHCP, LACP to ensure high performance network bandwidth connectivity. In addition to 4 Giga RJ-45 ports, communication. The supported Modbus TCP/IP protocol the switch is equipped with 5 Giga RJ-45/SFP combo makes the switches suitable for factory automation ports to deliver maximum throughput and flexibility for systems while offering enhanced connectivity and easier high-density connection while providing Giga uplink or network maintenance. JetNet 6059G provides dual Giga Ring connection. With the Korenix patented MSR redundant 10.5~60VDC power inputs and -40~75 oC technology, users can aggregate up to 4 MultiGigaRings wide operating temperature range to work reliably under into a single switch and ensure network reliability in vibrating and shock environments in maritime, railway or applications with increased bandwidth and expended system. Furthermore, JetNet 6059G supports advanced Ethernet Switch with 9 full gigabit ports and 32G rolling stock applications. A Beijer Electronics Group Company

Open the catalog to page 1

Industrial L2 / L3 Rackmount / Rail Ethernet Switch Flexible Combo ports for Enhanced Performance System integrators can configure the switch with as many as 10 different combinations for a variety of gigabit connectivity, including 100Mbps Single-mode/Muti-mode or 1000Mbps Single-mode/Multi-mode fiber, as well as automation applications. copper connections. Rackmount PoE Plus Switch 100/1000Mbps DDM SFP Transceiver for High Quality Monitoring The JetNet 6059G SFP socket supports 100Base-FX single-mode/multi-mode and 1000 Base-FX singlemode/multi-mode transceiver with speed detection and...

Open the catalog to page 2

Comprehensive Redundant Solutions – Multiple Super Ring (MSR ) The JetNet 6059G supports new generation ring TM also allows the JetNet series to easily (Multiple Super Ring), which connect with core management switches via standard includes various new technologies for different network Rapid Spanning Tree Protocol or through multiple paths redundancy applications and structures. The JetNet or nodes to increase the reliability by RDH 6059G allows aggregating up to 4 Gigabit Ethernet Homing) technology. By integrating MSR Aggregation Control Protocol (LACP) the JetNet series configured to...

Open the catalog to page 3

Industrial L2 / L3 Rackmount / Rail Ethernet Switch Seamless Ring Port Restoration Seamless restoration is a new Korenix patented packet loss. With a 0 second restoration time, this technology which can restore a failed ring without mechanism eliminates any unstable status and causing any loop problem, topology change and guarantees the applications running non-stop. Rackmount PoE Plus Switch Rapid Dual Homing (RDH ) Technology Rapid Dual Homing is also an important feature uplinks are sorted into primary, secondary and standbys based on their link speed. The uplink with supports ring...

Open the catalog to page 4

TrunkRing is a new feature in MSR which merges the two technologies of RSR and link aggregation. It takes advantages of aggregation to enhance the link redundancy, while increasing the link speed. The ring will open only if all the aggregated links are Asymmetric TrunkRing broken. Link aggregation can be achieved by either static trunk or LACP. Not all the link sections in a TrunkRing need to be the same. Ring links can be either symmetric or asymmetric. Some are a single path, and the others are aggregated by links where the number of links in a trunk group can be different. Users can...

Open the catalog to page 5

Industrial L2 / L3 Rackmount / Rail Ethernet Switch Link Aggregation Control Protocol Link Aggregation Control Protocol allows users grouping multiple Ethernet ports in parallel to increase the link bandwidth. The aggregated ports can be viewed as one physical port, so that the bandwidth is higher than just one single Ethernet port. The member ports of the Rackmount PoE Plus Switch same trunk group can balance the loading and backup with each other. The LACP feature is usually used when Industrial PoE Plus Switch higher bandwidth is needed for the backbone network. This is a cost-effective...

Open the catalog to page 6

Auto Topology Discovery & Efficient Management through LLDP and Korenix NMS JetNet 6059G supports topology discovery or LLDP (IEEE 802.1AB Link Layer Discovery Protocol) function that can help users to discover multi-vendor’s network devices on the same segment by an NMS system, which support LLDP function. With LLDP function, NMS can easily maintain the topology map, display port ID, port description, system description, VLAN ID, etc.. Once a link failure happens, the topology changed events are updated to the NMS to help users easily maintain the network system. Besides the SNMP and LLDP...

Open the catalog to page 7

Industrial L2 / L3 Rackmount / Rail Ethernet Switch Modbus TCP/IP for Factory Automation Network Enhancement The Modbus TCP/IP protocol is supported in JetNet monitor factory equipment: with just a single JetNet 6059G series for factory automation applications. It 6059G platform users can easily achieve enhanced enables administrator to connect to data acquisition monitoring and maintenance of the entire factory. (SCADA) system and read the switch's operating information using its own Modbus TCP/IP master program for monitoring and maintaining switch’s status. With the supported Modbus...

Open the catalog to page 8