CORDAS - Adjustment of length measuring instrument -

Variantes CORDAS fixed setting piece 9630.xxxx (with stand 4631.xxxx) setting devices for CORDAMETER 4630 CFK Setting in the same orientation like measuring Ø255 - Ø1500 fixed dimension insensitiv against thermal influence lightweight design (carbon-fiber) application of gauge blocks [9650.xxxx]

^ adjustable by measuring machines / gauge blocks ^ insensitiv against thermal influence ^ lightweight design (carbon-fiber) gauges and measuring instruments

Setting CORDAMETER & CORDAS Setting of a fixed adjustment dimension taking into consideration the measuring position

Fixed master Setting piece & stand Place CORDAMETER CFK 1. Adjusting sleeve 2. Measuring sleeve Release liftling lever Setting & measuring position Set dial to „0“ or adjustment dimension Positioning support ( radius) Adjusted CORDAMETER

gauges and measuring instruments Adjustable master AdjustableCORDAS 1. Presetting 2. Clamping on a flat (gaging) surface

Adjustable master 3. Taking the set length by CMM/bench 4. Ready for setting the instrument in production 7

Options for setting Kordt length measuring instruments Setting with… Length measuring bench high accuracy, flexible use setting device not close to the production machine, handling, access is limited, setting only horizontal Fixed setting masters CORD and CORDAS high accuracy, setting in the orientation of the measurement with stand, easy setting due to the matching design of the contact tips only one size for setting Adjustable setting assistance CORDAS flexible use over the range of the instrument (e.g. CORDAMETER), setting in the orientation of the measurement with stand, easy setting due...

Temperature compensation Measurement while observing the temperature of the test piece to imply the thermal expansion coefficient PUBLICATION: „Temperature influence during the measuring of large workpieces“, DREHTEIL + DREHMASCHINE 2/2010