Utility Communications Narrowband SCADA Radio Modems UHF Modems network V/UHF Modem Radio Network Management System V/UHF Modem V/UHF Modem VHF/UHF Radio Network Master ABB’s VHF/UHF radio modems are used for the impleGPS receiver: mentation of high performance wireless SCADA networks. precise time sync telegram delivered to RTU. � Frequency band: VHF (30to 300 Mhz) and UHF (300 to 3000 Mhz), 450 Mhz typically I/O: � to their extraordinary narrowband speed, and ThanksOccupied RF spectrum:intelligence, 12.5 or 25 Khz I/O input module with 2xAI, 2xAO, 2xDI, 2xDO. Communica� Maximum data speed: 9.6 switching time, they are suitableor 19.2 types of networks for all Kb/s tion with the I/O board over protocol Modus. Other protocols � Application: where emphasis is SCADA on speed and reliability. placed are implemented as required. In contrast to standard radio modems on the market a unique, highly secure and efficient system protocol is used on the radio channel and individual protocols (Modbus, IEC, DNP3, Profibus, etc.) are supported for communication over serial or Ethernet interface. Modems are manufactured in simplex, half-duplex and fullduplex options with an out-put power of 5 or 25 Watt. Typical areas of use Telemetry and SCADA for ■ water supply ■ oil & gas supply ■ electric power distribution automation User port modules Serial interfaces: available variants - 2xRS232, 1xRS232 (optically isolated), 1XRS422/485. Ethernet: fully-fledged Ethernet interface automatically sets communication to a speed of 10 or 100 Mbit/s. Control and diagnostics All SCADA radio system components are set up and controlled using programs based on MS Windows and Linux. The programs communicate with the radio network via serial port or Ethernet either directly with the local device or remotely with any other device in the system. Remote network supervision becomes therefore much simpler and reliable as multiple access points can be utilized. Control programs can be used for setting up or diagnosis of the radio parameters, the communication parameters and the user interfaces. They also support monitoring of operation on the radio channel and on user interfaces, obtaining statistics, etc. It is possible to save and load a file with the complete device configuration. Equipment firmware can be locked at several levels against unautho

Benefits ABB product portfolio ■ ABB SCADA know how and integration capabilities ■ ABB’s aligned telemetry and SCADA portfolio Performance ■ Long range coverage (without the need for direct visibility) ■ High system gain ■ Complies with ETSI EN 300113 for Listen Before Transmit, FCC, RSS, ECE10 Flexibility ■ Stationary networks of various types: point-to-point, point to multipoint, multipoint-to-multipoint ■ Sequential polling as well as spontaneous transmission thanks to a sophisticated collision avoidance mechanism ■ Addressable and protocol oriented units: more than 70 industrial protocols...