video corpo

iS3000 / SIP@Net - Advanced hybrid PBX switching systems
4Pages

{{requestButtons}}

Catalog excerpts

iS3000 / SIP@Net - Advanced hybrid PBX switching systems - 1

Communication Networks iS3000 / SIP@Net - Advanced hybrid PBX switching systems The iS3000 is an advanced hybrid PBX system with utility specific features. Its architecture provides a combination of IP telephony and traditional solutions by combining the best of hybrid and server based technology. Beside the iS3000 full hybrid PBX, a server version is part of the communication platform. It supports the broad range of critical utility features and functions. The call-processing software SIP@Net forms the basis for both the hybrid and the server solution. Communication is key Information and communications technologies are constantly changing. Speech and data networks are merging. Converged networks based on internet protocol (IP) pave the way for completely new and integrated speech and data applications. Features that count for utilities − − Optimized use of existing PLC bandwidth for PLC networks with the latest algorithms for speech compression − − Busy trunk break-in and forced release − − Scalability and module design, available from small to very large systems − − Redundancy where needed − − TDM and IP hybrid communication solution − − In-System IP gateway for IP trunks and IP extensions − − IP DECT locally and remotely −− SIP-based IP trunks and extensions −− Wide range of signaling protocols −− Integrated voice mail and automatic attendant −− Test call set up by selecting specified trunks manually −− Remote extensions through E1 and E&M interfaces −− Touchscreen dispatcher console applications −− Local or remote management through TDM or IP ABB implements Utility Communication networks with its FOX-family, the ETL-series for PLC-solutions, radio / Wi-Fi mesh infrastructure and LAN-devices, all offering the perfect mix of TDM and IP-services. Thanks to state-of-the-art IP enabling technology in the SOPHO iS3000, all of the proven features of traditional TDM telephony are available for IP extensions as well. SOPHO iS3000 gives utilities complete freedom in implementing an IP migration strategy. Earlier and future investments are therefore fully protected. Since the same performance is available for IP and TDM extensions, you determine the speed and the extent of your IP migration with full support of true IP peer-to-peer voice communication or SIP-based trunking. iS3000 grants like all other ABB solutions for utility communication systems a high level of future oriented investment protection while ke

Open the catalog to page 1
iS3000 / SIP@Net - Advanced hybrid PBX switching systems - 2

Integrated and external server solutions The main-functionality of iS3000 is defined by the SIP@Net software running on processors either on one or for redundancy reasons two PMC modules plugged into an iS3000 chassis. This robust 19-inch housing can host also e.g. traditional analogue voice interfaces. Instead of the embedded PMC version, one or several external servers can be used in combination with the traditional interfaces in the chassis. For pure SIP / VoIP – solutions not even an iS3000 chassis is required. Furthermore, any combination of PMC and external server is supported by...

Open the catalog to page 2
iS3000 / SIP@Net - Advanced hybrid PBX switching systems - 3

System capacity * CPU4000 based with corresponding feature set Hybrid configuration interfaces analogue extensions: IP trunks: - Tone/pulse dialing - Earth, flash, dial one recall Digital extensions: - B+D Uko (2-wire 2B1Q) - 2B+D Upn (2-wire) - 2B+D SO (4-wire, ISDN TBR3) lP extensions: - 10/100 Mbit/s Ethernet - TCP/IP - G.711 A-law, G.729A,AB - QoS (802.1Q/p,ToS) - SIP (RFC 3261) - TLS, SRTP Cordless extensions: - DECT (GAP standard) - WLAN (SIP standard) Analogue trunks: - Subscriber signalling - DDI/DDO via pulse, MFC, DTMF - Polarity detection - Metering (50Hz, 12/16 kHz) - Power...

Open the catalog to page 3
iS3000 / SIP@Net - Advanced hybrid PBX switching systems - 4

Physical characteristics - iS3000 19-inch version - Width 483 mm (19-inch) - Height 400 mm (9 U) - Depth 408 mm; 468 mm including front cover - Weight: 15 kg excluding system boards and AC power unit Power iS3000 based solution can be AC- or DC-powered - Operating voltage range: - AC: 240V, 47 to 63 Hz - DC: 42 to 60V, positive ground - Safety class (IEC) 60950-1 Compliance - European directives - Safety: 2006/95/EC - EMC: 2004/108/EC - R&TTE: 1999/5/EC - EU RoHs: 2002/95/EC - WEEE: 2002/96/EC - Council recommendation - EMF 1999/519/EC - European standards - EN55022 - EN55024 -...

Open the catalog to page 4

All Kopex International catalogs and technical brochures