video corpo

FOX505 Access Multiplexer
2Pages

{{requestButtons}}

Catalog excerpts

FOX505 Access Multiplexer - 1

Overview ABB extends its comprehensive portfolio of Utility Multiplexers by FOX505, a compact Access-Mux with transport capacity up to STM-1. The network element fully supports ring and linear topologies and is ideal to feed higher order SDH-backbones. Its extended operational temperature range and a wide choice of interfaces match the requirements of most utilities. The 19” wide / 4 units high chassis provides 14 front-access slots for: ■ 2 redundant controller modules ■ 2 redundant, hot swappable power supply modules ■ 2 high speed modules (e.g. STM-1) ■ 8 slots for any combination of other interface cards (e.g. E1, voice, LAN, legacy, G.HSDL etc.) The controller boards provide management access (LAN & RS232) as well as external alarm inputs (3) and one output. In addition, a synchronization port is available. Two board options with different cross-connect sizes allow optimizing this rugged network element technically as well as cost-wise. The design of the multiplexer allows continuous operation at temperatures up to 55°C. Whatever supply voltage in the range of 93-250 VAC / 36-72 VDC is applied, it can be handled by the same type of power supply module and redundant load-sharing operation is fully supported. The device can cope with the typical Ethernet / LAN utility requirements in the field of access-services. An Ethernet switch board offers L1 & L2 functionality whereas the IP / PPP board handles all TDM traffic carrying PPP-encapsulated IP-traffic. Like all other FOX-devices, FOX505 is managed by ABB’s network management system.

Open the catalog to page 1
FOX505 Access Multiplexer - 2

V.35, V.36/V.11, V.24/V.28 G.HDSL board FXO / FXS telephony boards E&M telephony board Ethernet switch board IP/PPP-interface board CESoP board Alarm & serial IF board Characteristics/number of ports Includes DXC for 61xE1@64kbps levels support redundant config Includes DXC for 260xE1@64kbps levels support redundant config 1 port for short/long haul or coaxial Variants for 1/4/16 ports 1 port Supports up to 6 ports for 64k/128/256 kbps (G703) Up to 6 ports; option for X50 support Supports up to 6 ports for 64k/128/256 kbps (G703) Variants for 4/10 ports Supports 4 ports for 4 wire For up to...

Open the catalog to page 2

All Kopex International catalogs and technical brochures