KOPAL 4000 NEWTON The mini clamping system with tightening via eccentric, resulting in a very low space requirement. The eccentric ensures precise, fast and powerful clamping (4000 N). HORIZONTAL MINI-CLAMPING MINI-CLAMP SYSTEM Multi-Clamping With a height of less than 6 mm and a width of 20 mm, the plate clamps leave a maximum of space for tool clearance. High clamping Clamp (1 single rigid stop) Firmly presses the workpiece onto the stops. Clamping force : Clamping torque : Clamping range : Compact Ultra-quick clamping High clamping power Cylindrical parts 7.5 2.5 Low clamping Single stop (1 single rigid stop) 2 stops are necessary to position a workpiece along an axis. Double stop (2 rigid stops) 1 stop is sufcient to position a small workpiece along an axis. 6000 N 9 N.m 1.2 mm Using th e eccent ric Clamp-slot for T-slot tables 70° Clamp-slot Ref. 25-260 25-262 25-264 25-266 25-268 15 B Workpiece supported on the table or raised with a wedge. (for through-hole machining) SW 4 20 15 4 30° Fast 1/4 turn clamping 10.5 7.5 5 Equipment includes : 1 clamping element 1 stop element B A for slots : 46 18 10 mm 48 18 12 mm 52 22 14 mm 48 25 16 mm 48 25 18 mm A 1.2 A

HORIZONTAL 4000 NEWTON MINI-CLAMPING KOPAL Mini-clamping for specific assembly Clamping elements Ref. The moving clamp/locators pivot around an eccentric axis, which carries out the clamping. They can clamp in all directions. Pillar-type moving clamp/locator clamping height 2.5 mm 25-210 Raised pillar-type moving clamp/locator clamping height 7.5mm 25-215 Clamping key (sold sepatately) T-shaped, 4mm hexagonal 25-980 25-210 25-215 Stops Ref. Ground xed stops are xed in position with special screws ensuring high precision mounting. 25-105 25-110 Fixed clamp/locator clamping height 2.5 mm Double...