Catalog excerpts
Complete kit 12000 Newton Comprising : 1 steel 400mm mounting bar (mounted with M 12) 1 clamping element 1 xed clamp / locator Clamping screws and clamping key HORIZONTAL CLAMPING SYSTEM HYPOBLOC SYSTEM ular Mod bly m asse a vice Is used as ined to be mach workpiece Raises the Precision surfacing Complete
Open the catalog to page 1HORIZONTAL CLAMPING SYSTEM Ref. Complete kit 12000 Newton Comprising : 2 multiple supports (mounted with M 12) 1 clamping element 1 xed clamp / locator Clamping screws and clamping key Modular assembly ing 1/4 turn 12000 Newton Eccentric with 8 mm hexagonal socket Clamping with left or right turn or left
Open the catalog to page 2HORIZONTAL CLAMPING SYSTEM HYPOBLOC SYSTEM Clamping element Ref. Hardened steel body with clamping eccentric and moving spring-steel clamp which pushes down and clamps the workpiece. (with clamping screws, washers and clamping key) Clamping element for mounting bar and support Clamping force : Clamping torque : Clamping range : Adjustment : Fixed clamps (Stops) Spring-steel clamp / locator (with clamping screws) Clamping height 7 mm Standard clamp / locator Double xed clamp / locator For clamping 2 facing workpieces Clamping heights Clamping with pushing down effect: height 7 mm...
Open the catalog to page 3HORIZONTAL CLAMPING SYSTEM Support (mounting bar) Hardened steel reference elements Rectied thickness. 2 rows of holes (H6) ensure that clamping components or xed clamps / locators (stops) are precisely positioned in relation to the centring locator Ø 16 - 28 mm, located under the lower side of the bar. 400 mm mounting bar Mounted with 3 x M 12 screws (provided) Capacity (width of workpiece) : 1 workpiece 260 mm max 2 workpieces 120mm max Multiple support 09-016 For large workpieces. The workpiece can be clamped on the table or raised by 28 mm. Mounted with 2 x M 12 screws (provided) 8 mm...
Open the catalog to page 4Rectified centring screws 0 10.2 - M 10 screws for mounting clamping For mounting single fixed clamps. For mounting clamping elements and fixed clamps with riser blocks. For mounting clamping elements with riser block. Lateral stop The lateral stop is positioned in 6 x M 8 points on the side of the mounting bar. It is adjustable in height Made from hardened rectified steel with M 14 internal screw thread for For slot size or diameter: These locators enable quick and precise alignment of mounting bars and supports.
Open the catalog to page 5Double xed clamp 09-082 12000 NEWTON HORIZONTAL CLAMPING SYSTEM 4
Open the catalog to page 6All KOPAL CAROSSINO catalogs and technical brochures
-
KOSTO
2 Pages
-
Clamp with retractable ARM
2 Pages
-
Blocapress
1 Pages
-
Vertical Clamping system
1 Pages
-
Modular vice 22000 N
4 Pages