*mydirectindustry

VPX600

Product catalog summary

Overview: The VPX600 is a 3U/AC power supply unit designed for high efficiency and reliable performance. It features a 3U/10HP VPX form factor with an integrated low-noise fan for effective air cooling. The unit delivers up to 600W of power with an efficiency of up to 89%, even at a 120V AC input.

Specifications:

Form Factor: 3U, 10HP
Weight: 650g
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C
Input Voltage Range: 85-264V AC
Input Current: 6A at 120V AC
Inrush Current: 20A at 265V AC
Insulation: 4000V AC (Input-Output), 1500V AC (Input-Chassis), 250V DC (Output-Chassis/Output)

Output Specifications:

DC Outputs: 12V/28A, 5V/25A, 3.3V/19A, ±12V AUX, 3.3V AUX
Parallel Operation: Supported for redundancy via Hartmann power backplanes
Over Current Protection: 105% - 125% of rated current
Ripple and Noise: 1% Vnom (20MHz BW, pk-pk)
Holdup Time: Minimum 17ms, typical 20ms, maximum 21ms at 600W output and 120Vrms input
Turn ON Rise Time: 1.5-3.5ms for 3.3V/12V/5V
Turn ON Delay: 750ms (AC to PG) for 3.3V/12V/5V
Line Regulation: ±1% Vnom for 3.3V/12V/5V
Load Regulation: ±50mV/±100mV/±50mV for 3.3V/12V/5V
Overvoltage Protection: 9.5V/18V/9.5V for 3.3V/12V/5V
Over Temperature Protection: +115°C – 125°C (Latching)

Auxiliary Power:

±12V AUX/3.3V AUX Power Input: +12V/3.3V
Maximum Current: ±12V AUX/3.3V AUX: 1A/6A
Current Protection (Fuse): ±12V AUX/3.3V AUX: 1.5A/6A

Connector: Vita 62, Tyco 6450849-7

Additional Information: The document includes a disclaimer about the accuracy of the information and notes that specifications are subject to change without notice. The product is manufactured by Kontron Hartmann Wiener GmbH.

Catalog excerpts

3U/AC Power Supply 600W > 3U / 10HP VPX form factor with integrated low-noise fan for reliable air cooling > High efficiency up to 89% and full output power (600 W) even at 120 V AC input > Wide AC input range of 85-264 V at 47-63 Hz with 20 A max inrush current > Reinforced isolation: 4000 V AC (Input-Output), 1500 V AC (Input-Chassis), 250 V DC (Output-Chassis/Output) > Parallel operation supported for redundancy via Hartmann power backplanes

Open the catalog to page 1