*mydirectindustry

Catalogs
Kontron
ETX®-LX2

ETX®-LX2

Product catalog summary

Overview: The ETX®-LX2 is a highly integrated Computer-on-Module designed for low power consumption, utilizing the AMD Geode™ LX800 processor. It supports applications with space constraints due to its compact design, allowing operation without active cooling.

Specifications: The module features the AMD Geode™ LX800 processor at 500MHz with integrated graphics, 128 KB L2 cache, and the AMD Geode™ CS5536 chipset. It supports up to 1 GB DDR-RAM and includes 2x Serial ATA ports, 1x PATA 100, and a CompactFlash™ socket. Connectivity options include 4x USB 2.0 ports and 10/100 MBit Ethernet. The sound is managed by an ALC203 AC97 controller, and video capabilities include LVDS up to UXGA and CRT up to WUXGA resolutions.

Form Factor and Power: The ETX® 3.0 form factor measures 95 x 114 x 10 mm. Typical power consumption is 6.5 W at 500 MHz, 5V.

Environmental Conditions: The module operates within a temperature range of 0°C to 60°C and can be stored between -30°C to 85°C. It supports humidity levels of 10% to 90% during operation and 5% to 95% in storage (non-condensing).

Ordering Information: Various configurations are available, including models with LVDS and digital interfaces, as well as heat spreaders with threaded or through holes. Memory modules are available in 256MB, 512MB, and 1GB capacities.

Catalog excerpts

ETX® 3.0 - SETTING THE STANDARD AGAIN! ► AMD Geode™ LX800 and CS5536 ► Lowest power consumption ► DDR SODIMM for maximum memory throughput ► ETX® 3.0 - Long term support ► 2x SATA, 4x USB 2.0, graphics, CompactFlash™, etc.

Open the catalog to page 1

The ETX®-LX2 (Embedded Technology extended) is a highly integrated and fast Computer-on-Module with extreme low power consumption. It allows, due to the used AMD LX800 processor, the usage of the board without active cooling in applications, where space limitations (the maximum height without heat sink is only 10 mm!) are major requirements. It also takes advantage of the new ETX 3.0 specification that allow for 2 Serial ATA ports without violating the existing ETX 2.8 pin usage. A CompactFlash™ socket is already mounted on the ETX®-LX2 and offers you a lot of possibilities. For further expansions...

Open the catalog to page 2

All Kontron catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list