► High Power Airfl ow Front to Rear (F2R) and up to six 250 Watt Power Supplies ► PICMG® 2.16 Packet Switching Backplane with two PCI Segments, Dual Nodes on all Slots and Dual Switch Slots ► Chassis Monitoring through TCP/IP

CP-ASM10-PSB CARRIER CLASS CompactPCI® PLATFORM Power full With the power of up to four power supplies of 250 watts each it is a joy to every system designer to be able to provide his application with a full power platform to meet the demands of the growing power consumption of modern CPU and DSP blades. To dissipate all of this power the CP-ASM10-PSB is equipped with three hot swappable fans each with 294 m³/h or 173 CFM. This provides the platform with an average airflow of 3 m/s or 590LFM. This platform is therefore very well suited for providing power to multiple CPU blades. Scaleable To...

Anaodized aluminium based 19" rack Dimensions: 10U x 84 HP (445 x 483 x 325 mm) POWER SUPPLY SAMPLE CONFIGURATION CHASSIS MONITOR MODULE GENERAL TEMPERATURE RANGE HUMIDITY RANGE MTBF SCHOCK AND VIBRATION SAFETY PROTECTION CLASS WEIGHT Housing 3 U, 8 HP with P47 in PICMG2.11 standarized connector. Featuring redundancy, current sharing and hot swap. Output Voltage (Current): +3.3 V (40 A), +5.0 V (40 A), +12 V (5.5 A), - 12 V (1.5 A). Maximum total output power: 200 W at 250 lfm air flow Interference suppresion (EN50081-1, EN55011, EN55022) Front panel status LED indicators: - Green: Input power...

Note: 1) Other Backplane options on request 2) Ask for the available selection of PICMG2.16 CPU blades from Kontron 3) More information on CPCI products can be found on our website: http://www.kontron.com Kontron Europe GmbH Gutenbergstrafee 2 85737 Ismaning, Germany Tel.: + 49 821 4086-0 Fax: + 49 821 4086-111 [email protected] Copyright © 2021 Kontron. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the...