KONICA MINOLTA State of the Art measurement device to measure Colour, Density and Light Giving Shape

FD-7/FD-5 Ultralight Spectrodensitometer the perfect instrument for conventional and digital printing and packaging applications For the first time UV calibration in accordance with to ISO 13655 M1 The new Konica Minolta FD Spectrodensitometers conform to measurement mode M1 of ISO 13655:2009. In addition to ISO measurement modes M0, M1, M2 and M3, the patented virtual UV calibration allows the use of any light source for the measurements. Close correlation with visual evaluation The impact of fluorescent whitening agents in papers depends on the amount of UV in the viewing environment. Until...

Spectrodensitometer We take all possible steps to ensure the accurracy of your instrument With conventional measurement devices it is necessary to regularly correct for wavelength shifts. Historically this could only be done by the maker of the instrument. The models FD-5 and FD-7 perform an evaluation of the wavelength accuracy and if necessary a shift compensation with every white calibration. Thanks to the additional correction of temperature drifts you are assured that you are using a precise and stable instrument between maintenance checks. Some choose not to talk about these problems, we...

Model Spectrodensitometer FD-7 FD-5 Illumination/viewing system 45°a: 0°(annular illumination) 1 Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reflectance measurements* Spectral separation device Concave grating Wavelength range Spectral reflectance: 380 to 730 nm; Spectral irradiance: 360 to 730 nm Wavelength pitch 10 nm Half bandwidth Approx. 10 nm Measurement area Ø3.5mm Light source LED Measurement range Density: 0.0D to 2.5D; Reflectance: 0 to 150% Short-term repeatability Density: σ0.01D Colorimetric: Within σΔE00 0.05 (When white plate...