Catalogs >
Konica Minolta Sensing >
FD-7 and FD-5

FD-7 and FD-5
1 / 6Pages

Catalog excerpts

FD-7 and FD-5 State of the Art instruments for measuring Colour, Density and Light

Ultra light Spectrodensitometer the perfect instrument for conventional and digital printing and packaging applications For the first time UV calibration in accordance with ISO 13655 M1 The new Konica Minolta FD Spectrodensitometers conform to measurement mode M1 of ISO 13655:2009. In addition to ISO measurement modes M0, M1, M2 and M3, the patented “Virtual Fluorescent Standard“ (VFS) technology (UV calibration) allows the user to take measurements accurately for any light source. Close correlation with visual evaluation The impact of fluorescent whitening agents in papers on the final...

Open the catalog to page 2

We take all possible steps to ensure the accuracy of your instrument With conventional Instruments it is necessary to regularly correct for a wavelength shift. In the past, this could only be corrected by the manufacturer. The FD-5 and FD-7 perform an evaluation of wavelength accuracy and if necessary a shift compensation with every white calibration. As the instrument also corrects for temperature drifts one can be assured of precise and stable measurements between annual preventive maintenance checks – Testimony to Konica Minolta’s superior technology and commitment to innovation....

Open the catalog to page 3

Achieving standards with ease B World first: Conversion of measurement backings The Konica Minolta FD-series Spectrodensitometers solve the challenge of colour control on a black backing against standards that were established for a white backing. The built-in backing compensation function is a world first in a spectrodensitometer. B Quality - not compromises TARGETMATCH displays the optimal print density to achieve stored colour standards. With ISOCHECK these standards can be controlled according to colour value and tone value increase without the need for additional software. The...

Open the catalog to page 4

The ColorScoutA+ is an automated precision xy-stage with a 320*460mm scan area to enable automated measurements of characterisation charts with a large number of colour patches. The FD chartmaker is included free of charge to enable users to easily create complex test chart layouts. Using the xy-stage and the FD-7 users can make significant time savings when scanning large test charts. Solutions built around your needsIntelligent solutions for speciality printing Using CSA+ and the basICColor catch Software Suite enables highly automated measurements of charts even if they have to be...

Open the catalog to page 5

*1 Illumination for wavelengths under 400nm is unidirectional. *2 Available when using PC software. SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. Always connect the instrument to the specified power supply voltage. Improper connection may cause a fire or electric shock. with removable target mask attached SPEKTRALDEN5ITOMETER FD-7/FD-5 < System Diagram > Displays shown are for illustration purpose only. KONICA MINOLTA and the Konica Minolta logo and the symbol mark, and «Giving Shape to Ideas» are registered...

Open the catalog to page 6