KONICA MINOLTA Makes its debut with more multifunction to achieve the effective gloss with the previous MULTI Large screen size and easily viewable liquid crystal display. Easy operation with mode scroll wheel. By operating the mode scroll wheel in accordance with easy-to-understand menu items, you can set a wide array of functions easily. A wide array of display modes Geometry selection,^ from the Main Menu screen ments are available with one Wide measurement range that can be measured from plastic to metal surface with a high gloss finish : 0.0-2,000 GU The gloss difference measurement of the standard/sample and the PASS/FAIL evaluation. You can make a pass/fail evaluation by setting the limit value. You can enter the sample name and the standard value name in value cliff Geometric selection selected two angles Sample name RHSf iSflHPLE value dirt ■Standard value name Geometric selection selected three angles You can measure by selecting Basic |node, Continuous, Statistics from pngle from the Geometry selection 'screen and display two angles or three angles at the same time. Autodiagnosis function of calibration This means a little frequency of calibration and long-term stability. In addition, if the calibration is required, the message will be Please clean standard Calibrating standard Protective holder

With dedicated Data transfer software (gloss-link), the data management such as data transfer to Excel®* is easy. 11 Microsoft Excel® 97 or higher. Windows®, Windows NT® and Excel® is a trademark or registered trademark of Microsoft Corporation of America or its subsidiaries. Note : The specifications described in this document are subject to change without notice. MULTI GLOSS 268 / UNI GLOSS 60 conforms with international specifications ASTM D 523, DIN 67 530, Registration Date : March 3,1995 Registration Date: March 12,1997 SAFETY PRECAUTIONS iy For correct use and for your safety, be sure...