KONICA MINOLTA Auto Scan Easy-to-use, accurate and super fast! Automatic next-generation chart reader Giving Shape to Ideas

Super fast spot color measurement A color chart with 1,500 patches can be processed in about 4 minutes, from inserting the color chart to output of measurement results. Plus, the FD series can determine results under multiple illuminant conditions (M0, M1 and M2) from a single measurement, so the color chart needs to be scanned only once. To ensure accuracy, scanning is performed as a series of ultra-high-speed motions which precisely position the FD-9's color sensor at each measurement point and halt the motion just long enough to measure the point before moving to the next point. Easy-to-read...

Measuring printing unevenness Automatic detection of color patches enables printed materials that mix color patches and pictures or illustrations, such as the example charts above, to be measured without a preset chart definition file, so existing charts can continue to be used. At the start of each measurement, the FD-9 uses an image sensor to pre-scan the chart and automatically detect measurement points before performing the color scan of the detected patches. Automatic color patch detection also means that the markers used by conventional chart reader to detect patch positions are not needed....

Measurement Utility Software FD-S2w (Standard accessory) Features: • Enables easy measurements of color charts with or without a definition file. • Enables creation of color chart definition data from acquired image data, deletion of automatically detected patches from the points to be measured, and addition of measurement points anywhere within a picture or pattern. • Evaluation of colors under user-defined illuminant data measured with the Konica Minolta Illuminance Spectrophotometer CL-500A or Spectrodensitometer FD-7 in addition to the standard illuminants for the M0, M1, and M2 measurement...

Full service support Service support is available worldwide. Konica Minolta has a vast service support network that includes service centers in the USA, Europe and Asia, in addition to the factory in Japan. This ensures the FD-9 can be swiftly serviced and calibrated no matter where in the world it is used. Sales office Service facility Color tiles for absolute color measurement checking (Order-made) Color tiles enable users to easily check that the measurement values from their FD-9 are correct. System Diagram Dimensions (Units: mm) Auto Scan Spectrophotometer FD-9 716 AC Adapter Auto Scan Spectrophotometer...

• Displays shown are for illustration purpose only. • The specifications and appearance shown herein are subject to change without notice. • KONICA MINOLTA, the Konica Minolta logo and symbol mark, and "Giving Shape to ideas" are registered trademarks or trademarks of KONICA MINOLTA, INC. • The baslCColor logo is a registered trademark of baslCColor GmbH. • Other company names and product names used herein are trademarks or registered trademarks of their respective companies. *1 Unidirectional illumination for wavelengths of 400 nm and below *2 M0, M1 and M2 are lighting conditions contained...