KOIMICA MINOLTA measuring Colour, Density and Light Giving Shape to Ideas

Ultra light Spectrodensitometer the perfect instrument for conventional and digital printing and packaging applications For the first time UV calibration in accordance with ISO 13655 M1 The new Konica Minolta FD Spectrodensitometers conform to measurement mode M1 of ISO 13655:2009. In addition to ISO measurement modes M0, M1, M2 and M3, the patented “Virtual Fluorescent Standard“ (VFS) technology (UV calibration) allows the user to take measurements accurately for any light source. Close correlation with visual evaluation The impact of fluorescent whitening agents in papers on the final print...

We take all possible steps to ensure the accuracy of your instrument With conventional Instruments it is necessary to regularly correct for a wavelength shift. In the past, this could only be corrected by the manufacturer. The FD-5 and FD-7 perform an evaluation of wavelength accuracy and if necessary a shift compensation with every white calibration. As the instrument also corrects for temperature drifts one can be assured of precise and stable measurements between annual preventive maintenance checks – Testimony to Konica Minolta’s superior technology and commitment to innovation. Standalone...

Achieving standards with ease Challenges are solved by expertise World first: Conversion of measurement backings The Konica Minolta FD-series Spectrodensitometers solve the challenge of colour control on a black backing against standards that were established for a white backing. The built-in backing compensation function is a world first in a spectrodensitometer. Quality – not compromises TARGETMATCH displays the optimal print density to achieve stored colour standards. With ISOCHECK these standards can be controlled according to colour value and tone value increase without the need for additional...

The ColorScoutA+ is an automated precision xy-stage with a 320*460mm scan area to enable automated measurements of characterisation charts with a large number of colour patches. The FD chartmaker is included free of charge to enable users to easily create complex test chart layouts. Using the xy-stage and the FD-7 users can make significant time savings when scanning large test charts. Solutions built around your needs Intelligent solutions for speciality printing Using CSA+ and the basICColor catch Software Suite enables highly automated measurements of charts even if they have to be distributed...

Illumination/viewing system 45°a:0°(annular illumination) *1 Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition A for reflectance measurements Spectral separation device Concave grating Wavelength range Spectral reflectance: 380 to 730 nm / Spectral irradiance: 360 to 730 nm Wavelength pitch Half bandwidth Measurement area Light source Measurement range Density: 0.0D to 2.5D; Reflectance: 0 to 150%; Illumination 0 to 9990 Lux Short-term repeatability Density: σ0.01D; Without polarization filter: 0.0D ~2.5D, Yellow: 0.0D ~2.0D With polarization filter: 0.0D...