- Catalogs
- Kongsberg Automotive
- Smooth bore Metric Heavy Wall
Smooth bore Metric Heavy Wall
Smooth bore Metric Heavy Wall
Kongsberg Automotive's Smoothbore Metric Range is designed to accommodate standard hydraulic tailed fittings. The internal diameter (ID) of these hoses is slightly larger than the Imperial Range, which reduces the insertion force needed for assembly. This design helps users of hydraulic rubber hoses minimize inventory by requiring only one fitting type for all hoses.
Gas Hose 1 Wire Braid Range
The document provides a detailed table listing various specifications for different hose models, including part numbers, braided ID and OD, tube wall thickness, maximum working pressure, minimum burst pressure, and minimum bend radius. Key data points include:
- Hose sizes range from 2.0mm to 26.1mm in diameter.
- Maximum working pressures range from 1,160 psi to 4,330 psi.
- Minimum burst pressures range from 3,500 psi to 10,000 psi.
- Minimum bend radii range from 25mm to 305mm.
Properties
- Application: These hoses are used globally across various industries such as Industrial, Chemical, Pharmaceutical, Automotive, and Food, especially where high temperature, pressure, cleanliness, or flex fatigue are concerns.
- Design: The hoses feature a smoothbore PTFE tube with a high tensile SS 304 braid in metric sizing.
- Inner Layer: Medium wall smoothbore PTFE tube.
- Outer Layer: High tensile 304 maypole wound.
- Temperature Range: -60°C to +260°C (-76°F to +500°F).
- Material: PTFE according to ISO12086, Part 1.PTFE-E.P.D.M 1.6.1.C.E.4_12.
Catalog excerpts
KONGSBERG AUTOMOTIVE FLUID TRANSFER SYSTEMSMetric Heavy Wall Properties Product Description Temperature Min / Max Kongsberg Automotives Smoothbore Metric Range is designed to accept standard hydraulic tailed fittings. The ID of the hoses are made slightly larger than the Imperial Range so helps reduce the insertion force required to make assemblies. The Metric hose range was designed to help reduce Hydraulic rubber users reduce their inventory with only needing to stock one fitting to suit all hoses. Application Used globally in the Industrial, Chemical, Pharmaceutical, Automotive and Food industries when lesser hoses can't cope with the temperature, pressure, cleanliness or flex fatigue. Design Smoothbore PTFE tube with high tensile SS 304 braid in metric sizing Inner layer Medium wall smoothbore PTFE Outer Layer High tensile 304 maypole wound -60°C to +260°C (-76°F to +500°F) PTFE according to “ISO12086, Part 1.PTFE-E.P.D.M 1.6.1.C.E.4_12” Gas Hose 1 Wire Braid Range USA Part Number Your Flexible PTFE Hose Partner www.kahose.com
Open the catalog to page 1All Kongsberg Automotive catalogs and technical brochures
Fluoro-comp+1 Page
Lifeflex+2 Pages
ETFE hoses1 Page
Heavy Duty PTFE1 Page
Medium Duty PTFE1 Page
Pressureflex2 Pages
Fittings29 Pages
Smooth Bore Metric Range1 Page
DNV GL1 Page
Tape Wrap1 Page
Convo-Flex3 Pages
Autosport hoses1 Page
SAE 100 R141 Page
Fluoro-comp1 Page
