- Catalogs
- KONCAR - Electrical Engineering Institute Inc.
- KONCAR-Institute-KonLab-120–Laboratory-Power-Converter-70-1710
KONCAR-Institute-KonLab-120–Laboratory-Power-Converter-70-1710
KONCAR-Institute-KonLab-120–Laboratory-Power-Converter-70-1710
- Input Voltage: 3×400 VACRMS 50 Hz
- Input Current: 250 AACRMS (max)
- Output Power: 120 kVA
- Output Voltage Range: 3 × (100÷700 V)
- Output Frequency Range: 45÷65 Hz, 30÷200Hz
- THD: <3% over the whole output voltage range
- 3-phase, variable voltage and frequency output with high resolution adjustments
- Multiple operating modes and galvanic isolation of loads
- High efficiency power conversion (over 90%)
- Robust mechanical design with high reliability and easy maintenance
- Remote control and monitoring capabilities
- Overvoltage, overcurrent, and overtemperature protection
- Integration into laboratory safety signalization and control systems
- Low noise operation and silent mode
- Standard interfaces: CAN (CanOpen), RS485 (MODBUS), Ethernet (MODBUS)
- Optional interfaces: Modem, GPRS
- 7” touch screen LCD for control and monitoring
- Data logging via flash memory, optional SD card
- Web server available as an option
- Dimensions: W×H×D 1200 (1600) × 2000 (2200) × 800 mm
- Weight: 900 ÷ 1500 kg
- Installation altitude: < 1000 m
- Ambient temperature: -10°C to +50°C
- Relative humidity: 0% to 85%
- Protection level: IP54/IP20
Catalog excerpts
tradition. knowledge. responsibility. m Transformers Automation equipment Pumps W Fans 9 Converters c6 Renewables .».jL Ship equipment
Open the catalog to page 1
|KonLab - 120 LABORATORY POWER CONVERTER Laboratory Power Converter KonLab series are high power lab inverters used as a power supply for a variety of different three phase loads. KonLab-120 is a version with 120 kVA nominal power output. Its output voltage and frequency can be easily and independently adjusted using intuitively designed HMI. KonLab modular hardware and software platform is developed to be highly flexible which provides an easy adjustment to customers needs in terms of different power outputs, different communication interfaces, various control mode parameters: e.g. voltage,...
Open the catalog to page 2
tradition. knowledge. responsibility. HW & SW protection of vital components KonLab comes with hardware and software based protection on AC input and output to ensure prevention from explosions, fire or other damage that may affect converter’s components during the operation or cause injuries to operators. Protection status and converter operation status is shown on HMI, signal lights and additional signal tower, if installed. All statuses can be forwarded to consoles for remote operation or to a higher-level (SCADA) system via MODBUS (RTU/TCP) or CAN connection. Operating errors are stored locally,...
Open the catalog to page 3
** Other sizes on request www.koncar-institut.com KONCAR Electrical Engineering Institute, Inc Contact us for more [email protected] ISI Fallerovo setaliste 22 Zagreb 10000, Croatia KONCAR - Institut - KonLab 120 - Laboratory Power Converter-70-1710
Open the catalog to page 4All KONCAR - Electrical Engineering Institute Inc. catalogs and technical brochures
HIGH VOLTAGE LABORATORY6 Pages
Thermo Power Plant Plomin 220 Pages
Wind turbine KO - VA 57 / 12 Pages
Wind turbine K802 Pages
KONCAR-Institute-PECS GUIDE6 Pages
KONCAR-Institute-GRAP IDE2 Pages
- Test stand
- Calibration system
- Test set
- Real-time monitoring module
- Laboratory calibration equipment
- Voltage detector
- Current calibrator
- Voltage calibration system
- Laboratory test station
- Power detector
- Resistance calibrator
- High-voltage test system
- Laboratory test system
- Electric test system
- Power calibrator
- Power transformer test system
- Transformer monitoring system
- High-power test system
- High-current test system
- Low-voltage test system