Single-shaft shredder for pre-shredding
12Pages

Slow-speed universal waste shredder

2 TERMINATOR - Slow-speed universal waste shredder Introduction Waste treatment for material recycling or energy recovery generally begins with a shredding process, in which the entire waste spectrum is conditioned for subsequent process stages. The TERMINATOR was built specifically for this purpose. As a slow-running single-shaft shredder, it can be used for all types of waste. Applications with drum/opposing comb system variants range from coarse pre-crushing to defined shredding. The continuous cutting gap adjustment allows tailoring of the produced particle size to subsequent usage. A...

Bulky refuse, waste wood, building material waste Hardly any other shredder can be used in such a broad range of applications as the TERMINATOR, something which is of course a massive benefit with bulky waste Bulky waste presents no problem for the sturdy, contrary-resistant U unit. With open cutting gap, the most awkward materials, such as railway sleepers (including iron plates), are broken up coarsely.Plated teeth prolong service life.The aggressive feed of the F unit and programmable reverse cycles ensure high throughput of waste wood. Household waste, residual waste For these material...

4 TERMINATOR - Slow-speed universal waste shredder The Komptech brand is synonymous with quality, reliability and stability in product value. This means that only premier quality sourced components are used alongside components manufactured in-house. The TERMINATOR has a modern Caterpillar® engine as its power source (complies to EURO Level IIIa). The complete muffling of the motor compartment reduces noise emissions to a minimum. With load-dependent rotation speed regulation (constant power control), the hydraulic drum drive ensures full advantage is taken of the engine output. Overload...

5 Machine walkabout The TERMINATOR can be configured precisely for the application using equipment options. For example, central lubrication simplifies servicing. The TERMINATOR responds to the press of a button when using the convenient radio remote control function from the cab of the wheel loader. The hook and trailer combination - controllable via remote control - combiner with the hook to provide the perfect degree of mobility on site. Effective separation of metallic contraries is carried out by a swivellable hydraulic overhead magnet (or alternatively by a magnetic roller on the...

TERMINATOR - Slow-speed universal waste shredder Universal shredding unit The roller has two spiral-shaped rows of triangular teeth. The teeth on the counter-comb are perfectly aligned with the geometry of the roller teeth. A central bolt connects tooth mounting and tooth. • aggressive material feed • threefold use of drum teeth • high resistance against contaminants robust drum for coarse pre-shredding for bulky waste, white goods, waste wood, railway ties, construction and demolition waste Univeral fine shredding unit The UF shredding unit consists of a drum with 30 plated teeth arranged...

7 Shredding unit F Fine shredding unit Alternating left and right cutting teeth are mounted as a spiral around the drum. The drum teeth are attached to holders and secured with a locking device. The fixed axial cutting gap between drum tooth and counter-tooth produces a defined cut. The counter-teeth are inserted through the opposing comb and are locked on the rear side. • universal application • high teeth for active material feed • dual purpose use of drum teeth • tool-free exchange of teeth • adjustable cutting gap of 0 to 50 mm for a wide range of applications, good solution for mobile...

8 TERMINATOR - Mobile Mobile Advantages TERMINATOR mobility means moving quickly and easily from A to B, and also speedy operational readiness on site: Unload, open up, power on, then start work. Komptech has mastered the art of building mobile highperformance machinery, adhering completely to tight dimensional, weight and emission tolerances like no other. The TERMINATOR offers a choice of hook lift version, 3-axle chassis, or steel tracks. On the hook lift version, towing or automatic feet options provide manoeuvrability on site. With its airsprung axles and automatic feed device, the...

9 TERMINATOR - Stationary Stationary Advantages If mobility is not required, electric drive is the best solution from an operational efficiency viewpoint. Given their energy efficiency, virtually maintenance-free operation and controlrelated benefits, electrical drives are the solutions of choice – especially for large-scale plants with long machine operating times. The right machine exists for any system size because all installation sizes are available as electro-mechanical and electro-hydraulic versions. Besides the standard stationary frame, isolation of the drive unit from the...

TERMINATOR - Slow-speed universal waste shredder

11 Technical Specifications hook 1375 mm (at 10°) 10-35° 3955 mm 2465 mm trailer TERMINATOR 6000 3645 mm (at 35°) 11870 mm (at 35°) 12690 mm (at 10°) 3330 mm 4140 mm (at 35°) 10-35° 4365 mm 2905 mm TERMINATOR 6000 track 1815 mm (at 10°) 12430 mm (at 35°) 13250 mm (at 10°) 3330 mm station (Fill height / discharge height depending on outrigger height and flap type) 1820 mm (at 10°) 10-35° 4260 mm 2920 mm TERMINATOR 6000 4145 mm (at 35°) 10880 mm (at 35°) 11700 mm (at 10°) 3330 mm *or plant specific 2500 mm* 2806 mm (at 29°)* 29° 3150 mm* TERMINATOR 5000 x x = Height of feed x 2204 mm* 11110...

fechnology for a better environment Komptech GmbH Forge End, Lodge Farm, www. komptech.com We reserve the right to make technical changes due to ongoing development. E_0408