CHIPPO 500
8Pages

1 chippo 500 Tractor-driven drum chipper

2 chippo 500 - Chipper Introduction The CHIPPO 500 is a tractor-driven drum chipper for tree trunks and prunings. The active feed system, two different drum rotation speeds and the choice of material discharge via blower or conveyor belt make the perfect all round machine. The robust design and the use of premium components make a drive rating of up to 500 HP possible. This guarantees a throughput (output) up to 180 m³/h with the highest product quality. Highlights • aggressive feed with pre-compression due to two horizontal and two vertical feed drums • two principles of chipping: high...

3 Application Application Equipped with a host of technical innovations, the machine boasts highest performance and best product quality when chipping trunks and working with prunings. Tree trunks The CHIPPO can handle tree trunks up to 750 mm in diameter. A wide and long feed table facilitates placement of the trunks, while the active feed system does the rest. The use of two horizontal feed drums guarantees reliable seizing and automatic forwarding to the shredding area – even for large trunk diameters. At the same time, this system prevents lateral turning of the residual fraction and...

4 chippo 500 - Chipper Exhaust pipe with slewing unit Chassis and frame • 80 km/h chassis standard, further options available • Large flaps for simple service access • Compact dimensions for simple transportation Radial discharge belt, foldable for transport Feed table with chain conveyor (length: 2.400 mm) Material feed • Feed table: L 2400 x W 1700 mm Inlet opening: W 1000 x H 750 mm • Active feed system with defined transfer to the rotor • Integrated material leakage collection system Sturdy chassis, stable frame The base model of the CHIPPO has a sturdy 80 km/h chassis with tandem axle....

5 Machine walkabout Feed system with horizontal and vertical drums Blades system • Perfect attachment system: - quick to exchange - precise positioning - contaminant protection • 12 solid chip blades (sharpening reserve up to 40 mm) • Counter-blade can be used twice Drive system • Robust Powerbelt-drive with soft-start Simple screen basket exchange To exchange, completely extend the screen basket from the shredding area hydraulically and remove/insert from above. When shredding very moist material, the screen basket can be swivelled out completely. This minimises the risk of blockages. •...

6 chippo 500 - Chipper Discharge system Only the CHIPPO 500 offers the choice: discharge via conveyor belt or via blower. The press of a butten switches from one to the other - there is no more flexible or convenient solution for material removal. Both systems are coupled with the feeder via the controller. In the event of discharge overload, the chipping process is stopped and not started again until clearance. Blower discharge Three generously dimensioned screws feed the wood chippings into the powerful blower containing four paddles. The discharge pipe has a slewing unit, is lifted...

fechnology for a better environment Komptech GmbH Forge End, Lodge Farm, www. komptech.com We reserve the right to make technical changes due to ongoing development. E_1108