axtor 8012
8Pages

TECHNOLOGY FOR A BETTER ENVIRONMENT UNIVERSAL WOOD SHREDDER HIGH THROUGHPUT

» Long feed area, open to the front, with filling capability » Aggressive feed with pre- and vertical feed rollers chipper mode » High quality output with » Ideal servicing access to the motor (underfloor engine) The Axtor 8012 completes Komptech's range of products for biomass treatment In fast-running shredder mode with free- swinging tools, it produces material for composting. In reduced-speed chipper mode with fixed tools and chipping blades, it makes fuel for heating plants. Power is provided by an underfloor drum via a sturdy power band and a manual gearbox. This gives good engine...

Green waste, yard waste Green waste is a valuable input material for composting. Fibrous shredding increases the surface area, for speedy microbial decomposition. To do this, the Axtor uses free-swinging tools with a special slim-line profile and armouring, shredding the material like a hammer mill at high drum speed. Everything landing on the huge feed table is grabbed instantly by the active feed system and pulled in automatically. The Axtor's voracious appetite means that feeding is usually the limiting factor. The machine itself is capable of up to 400 m3 per hour. Wood chips: With...

Anwendung Inside the machine Engine and drive Built for top performance U nderfloor engine with excellent access from above and both sides The Axtor 8012 is powered by an underfloor-mounted Caterpillar C18 diesel engine, with a tough power band and optional gearbox drive. The shredder drum is 1.25 m in diameter and 1.6 m wide. There are 36 tool holders spiralling around the circumference. Since each holder is on an individual, removable floating shaft, tool change is easy. The movable shredder table with counter-cutter is held in place by hydraulic tension. The cutting gap can be adjusted...

Material feed integrated collection system for leakage material » Folding side walls and hinged hopper for easy feeding » Active feed system with sectional steel belt, transfer roller, 2 horizontal and 2 vertical feed rollers Shredding unit ( 2.1 m with vertical feed rollers) » Large open drum (1.25 m dia.) with spiral tool arrangement » Hydraulically adjustable chipping table for » 36 tool positions, easy change thanks to individual mounting » Free-swinging tools with carbide armoured » Fixed tool holders with supports for chipping orshredding blades, and overload Screen basket...

» Simple conversion from » Short setup times: Screen basket change in minutes, complete blade set change » High operational dependability through contrary-safe design » Logically laid-out operating panel with graphic control The biomass market is dynamic. To thrive in this market as a fuel supplier or shredding service provider, you need a flexible machine like the Axtor. With the right combination of shredder or chipper mode and the right blades and screening baskets, it can turn a wide variety of input materials into a product of the desired quality with high throughput. Conversion from...

Huge feed area At over 2 m wide and up to 6 m long movable feed hopper can accept the bulkiest items from the biggest shovels or grippers, without blockages. It can be opened at the front to take in long tree trunks. Folding side walls make it possible to feed the machine from both sides. Active feed The feeder specs are impressive - 1.6 m wide and 1 m high, fed by what is probably the best intake system in this machine class. The combination of horizontal and vertical feed rollers and a wide sectional steel belt ensure active transport into the machine, even with bulky green material. In...

technical specifications 5° 2840 mm 0° - 3 4700 mm (35°) axtor 8012 Trailer 15000 mm (35°) 2550 mm 5° 2840 mm 0° - 3 4700 mm (35°) axtor 8012 semi-trailer 16455 mm 2550 mm AXTOR 8012 Drive Engine / Power: CAT ® C18 / 570 kW / 780 HP Material feed Feed table L x W (mm): Trailer: 6000 x 2100 Semi-trailer: 7500 x 2100 Feed table height (mm): 2840 Feeder opening H x W (mm): 1000 x 1610 (with vertical feed rollers 2100) Shredding unit Drum diameter x drum width (mm): 1250 x 1630 Tools: 108 pieces free-swinging tools or 36 pieces fixed tools Drum rpm: 730 (Shredder mode) or 400 (Chipping mode)...