Linear Actuator Datasheet | KLM-G-40-0F2

Product catalog summary

Overview: The KLM-G-40-0F2 is an electric linear motor designed by KOMP-ACT SA, available in two variants: GREEN and GREENPLUS. It offers an affordable alternative to pneumatic systems, providing high dynamic performance relative to its size and weight. The motor is programmable for strokes, speed, and motion parameters using a field bus controller.

Specifications:

Continuous Force: 15-20 N
Peak Force: 27-35 N
Continuous Current: 2 A
Peak Current: 6 A
Force Constant: 5.4-6.8 N/A
Phase Resistance: 2.7-3.3 Ohm
Repeatability: ±0.150 mm
Accuracy: ±1 to ±0.5 mm
Acceleration: 72-90 m/s²
Max Speed: 2.1 m/s
Power Supply: 24 or 48 V DC
Operating Temperature: -20 to +45°C
Thermal Constant: 4.85-3.28 K/W
Slider Mass: 443 g + 1 g per mm stroke
Stator Body Mass: 825 g
Available Strokes: 40, 80, 120, 160, 200, 240 mm

Materials:

Shaft Bushing: Sintered bronze
Housing: Hard-anodized aluminium (aerospace grade)
Shaft: Hard chrome plated stainless steel (AISI 316L)

Technology: Utilizes a tubular three-phase low voltage iron core technology with guide rods for stiffness and shaft rotation suppression. The GREEN variant is cost-effective for standard applications, while GREENPLUS is suited for higher output needs.

Performance: The GREENPLUS variant is evaluated with a mass applied, increasing body temperature by +50°C from an ambient temperature of 25°C. The electronic controller calculates speed and position profiles for optimal efficiency.

Ordering Data: Includes shielded power and sensor cables with specific lengths and part numbers. Custom cable lengths are available upon request.

Accessories: Motion setup is managed via a web server interface embedded in the electronic controller. Various electronic drivers are available, including options for Ethernet, Profinet, EtherCat, and Power Link.

Catalog excerpts

Linear Actuator Datasheet | KLM-G-40-0F2-1

Electric Linear Motor. ✓ Available in GREEN and GREENPLUS ✓ Affordable electric technology to replace pneumatics ✓ Highest dynamic performance to dimension & weight ratio ✓ No need for fan or heat dissipator ✓ Programmable strokes, speed and motion parameter, fully programmable with field bus controller © 2022 KOMP ACT SA ALL RIGHTS RESERVED www.komp-act.com [email protected]

Open the catalog to page 1

Linear Actuator Datasheet | KLM-G-40-0F2-2

Edition 1 16/09/2022 Subject to alterations An innovative tubular three-phase low voltage 24/48 V iron core technology to provide highest dynamic performance in the smallest product footprint. It includes guide rods to provide more stiffness and suppress the rotation of the shaft. Front view Each model is available in two variants: ‣ GREEN for the most cost sensitive applications requiring standard performance, this model is ideal for pneumatic replacements. ‣ GREENPLUS for higher output applications, to improve either quality of production or production rate. Technical Data Side view Max. Average...

Open the catalog to page 2

Linear Actuator Datasheet | KLM-G-40-0F2-3

Edition 1 16/09/2022 Subject to alterations Operation Performance The below GreenPLUS actuators’ performance are evaluated considering a mass applied throughout the working cycle and generating an increase of the body temperature of 50°C starting at ambient temperature of 25°C. Waiting time 100 ms Note: the light green graph reads on the left y-axis and the dark green graph reads on the right y-axis. Horizontal Operation Vertical Operation Note: The electronic controller used in conjunction with KOMP ACT actuators automatically calculates the target speed and position profile in function of the...

Open the catalog to page 3

Linear Actuator Datasheet | KLM-G-40-0F2-4

Edition 1 16/09/2022 Subject to alterations Ordering Data GREEN Part Number Part Number Sensor cable Cable Type Power cable 3 Part Number Notes: • Both power and sensors cables are shielded cables made of PVC, Outer Diameter is 6 mm. • On both extremities of each cable, there is one ferrite with 16 mm of outer diameter and 52 mm length. • Operating temperature of both cables is in the range of 20° C to 75° C. • Cables are furnished with required connectors. • Custom length of cables is available on request. Accessories Drivers (choose one from below) TCP/IP KDRV 3 MK TP Electronic Driver with...

Open the catalog to page 4

Linear Actuator Datasheet | KLM-G-40-0F2

Linear Actuator Datasheet | KLM-G-40-0F2

Catalog excerpts

All KOMP-ACT SA catalogs and technical brochures