- Catalogs
- KOMP-ACT SA
- Linear Actuator Datasheet | KLM-40-0F2
Linear Actuator Datasheet | KLM-40-0F2
Linear Actuator Datasheet | KLM-40-0F2
- Continuous Force: 20-25 N
- Peak Force: 32-40 N
- Continuous Current: 2 A
- Peak Current: 6 A
- Force Constant: 5.4-6.8 N/A
- Phase Resistance: 2.7-3.3 Ohm
- Repeatability: ±0.150 mm
- Accuracy: ±1 to ±0.5 mm
- Max Acceleration: 185-225 m/s²
- Max Average Speed: 2.1 m/s
- Power Supply: 24 or 48 V DC
- Operating Temperature: -20 to +45°C
- Thermal Constant: 4.85-3.28 K/W
- Slider Mass: 200 g + 1 g per mm stroke
- Stator Body Mass: 825 g
- Overall Product Weight: 1025 g + 1 g per mm stroke
- Available Strokes: 40, 80, 120, 160, 200, 240 mm
- Materials: Sintered bronze bushing, hard-anodized aluminum housing, hard chrome plated stainless steel shaft
- Sensor Technology: Hall Sensor Linear Encoder
Catalog excerpts
Electric Linear Motor. ✓ Available in GREEN and GREENPLUS ✓ Affordable electric technology to replace pneumatics ✓ Highest dynamic performance to dimension & weight ratio ✓ No need for fan or heat dissipator ✓ Programmable strokes, speed and motion parameter, fully programmable with field bus controller © 2022 KOMP ACT SA ALL RIGHTS RESERVED www.komp-act.com [email protected]
Open the catalog to page 1
Edition 4 16/09/2022 Subject to alterations An innovative tubular three-phase low voltage 24/48 V iron core technology to provide highest dynamic performance in the smallest footprint. Each model is available in two variants: ‣ GREEN for the most cost sensitive applications requiring standard performance, this model is ideal for pneumatic replacements. ‣ GREENPLUS for higher output applications, to improve either quality of production or production rate. Front view Side view Technical Data Max. Average Speed, Vmax [m/s] Stator body mass, MT [g] Overall Product Weight [g] Shaft bushing material...
Open the catalog to page 2
Edition 4 16/09/2022 Subject to alterations Operation Performance The below GreenPLUS actuators’ performance are evaluated considering a mass applied throughout the working cycle and generating an increase of the body temperature of 50°C starting at ambient temperature of 25°C. Waiting time 100 ms Note: the light green graph reads on the left y-axis and the dark green graph reads on the right y-axis. Horizontal Operation Vertical Operation Note: The electronic controller used in conjunction with KOMP ACT actuators automatically calculates the target speed and position profile in function of the...
Open the catalog to page 3
Edition 4 16/09/2022 Subject to alterations Ordering Data GREEN Part Number GREENPLUS Part Number Cable Type Power cable Sensor cable Part Number Notes: • Both power and sensors cables are shielded cables made of PVC, Outer Diameter is 6 mm. • On both extremities of each cable, there is one ferrite with 16 mm of outer diameter and 52 mm length. • Operating temperature of both cables is in the range of 20° C to 75° C. • Cables are furnished with required connectors. • Custom length of cables is available on request. Accessories Drivers (choose one from below) TCP/IP KDRV 3 MK TP Electronic Driver...
Open the catalog to page 4All KOMP-ACT SA catalogs and technical brochures
- DC motion controller
- High-speed linear motor
- Synchronous linear motor
- Compact linear motor
- Programmable positioning controller
- Three-phase linear motor
- USB motion controller
- High-precision linear motor
- DC linear motor
- High-performance linear motor
- Iron-core linear motor
- Single-axis motion controller
- Modular linear motor
- Direct-drive linear motor
- Linear motion control card
- Electronic motion control card
- Maintenance-free linear motor
- 48 V linear motor
- Small linear motor