Alpha 488 S Crimping and twisting machine - 6 Pages

Add to MyDirectIndustry favorites
Alpha 488 S Crimping and twisting machine

Catalog excerpts

Alpha 488 S Twisting in a new dimension

 Open the catalog to page 1

Alpha 488 S produces fully automatically Twisted-Pairs out of two single bulk wires completely cut-to-length and terminated, with all quality controls included. The modular composition of the system provides superb flexibility. Four processing stations at the wire beginning and two at the wire end offer extensive processing possibilities. Highest flexibility The machine layout accommodates up to six processing stations. Wires with cross sections ranging from 2 × 0.22 mm2 (AWG 24), optionally from 2 × 1.3 mm2 (AWG 26), to 2 × 2.5 mm2 (AWG 14), (processing set short open ends up to 2 × 1.0...

 Open the catalog to page 2

Processing set Long and unequal length open ends on side 1  TFA  Twist force analyzer Outstanding user-friendliness The system is characterized by a remarkable userfriendliness. Accessibility to all stations is optimal due to a large swivel radius and an upwards opening protection cover. In addition, long and fold-up wing-doors allow the operator an excellent and quick access to the upper wire deposit tray as well as to the twisting area. A pivoting operator console allows an improved machine operation, since the wire deposit tray is freely accessible at all times. The touch screen which...

 Open the catalog to page 3

Maximal ease of maintenance Thanks to a sophisticated, highly innovative, wireless electrical transmission system - ICS (Inductive Communication System) in combination with an autonomous air-pressure storage system allows the suppression of the drag chain at the wire-puller carriage. The highly simplified guiding concept for the linear carriages, the compact deposit cells and some automated adjustments greatly simplify the installation and maintenance of the system. A single control cabinet and the simplified hardware architecture further facilitate the maintenance work. Technology The...

 Open the catalog to page 4

Twisted pair (also with different open wire ends) Cutting Seal insertion Split cycle for closed barrel Half stripping Cut pulled strands / Precision cut Full stripping Ink-Jet marking Options and Accessories Feeding systems

 Open the catalog to page 5

Machine layout Alpha 488 S Alpha 488 S / 4 m    Alpha 488 S / 7 m    Alpha 488 S / 10 m Reference values for piece output of Alpha 488 S Conductors Pneumatic pressure Draw-in Speed Acceleration Pitch Open ends S1+S2 Crimp module Seal loading module Technical data TW. Alpha 488 S    0326734 Version 3    Subject to change /gu /ep    Made in Switzerland Length range Extremely hard and tough wires may not be able to be processed even if they are within the above cross section range. If you are in doubt about your wires, we are happy to process your samples.

 Open the catalog to page 6

All Komax catalogs and technical brochures

  1. Cosmic 42R

    4 Pages

  2. MicroLab 30

    4 Pages

  3. MicroLab 55

    4 Pages

  4. Komax HMI

    8 Pages

  5. Komax MES

    12 Pages

  6. Iota 330

    6 Pages

  7. MicroLab 10

    4 Pages

  8. MicroLab 35

    4 Pages

Archived catalogs