*mydirectindustry

Catalogs
Komax AG
bt 712 Crimper

bt 712 Crimper

Product catalog summary

Overview: The BT 712 is a user-friendly bench top crimper designed for fast cycle times and efficient setup. It ensures high-quality processing of conductors when combined with a programmable stripping device and a bad crimp cutter.

Areas of Application: Suitable for quality-monitored crimping of individual strands and multi-pole cables, even with short stripping lengths. Compatible with commercially available crimp tools.

Operation: Operated via a color touch screen with a multi-language, icon-based graphical user interface called TopTouch, allowing for quick and logical operation.

Quality Assurance: Features integrated CFA/CFA+ crimp force analysis and a bad crimp cutter to ensure high-quality output. Quality measurements are mandatory during setup, and production only begins once specified values are met.

Benefits: Includes fast conversion, setup, and cycle times, active quality control, minimal material usage during setup, and easy operation. It also saves machine and processing parameters and separates good/bad crimps by cutting off bad ones.

Optional Features:

Programmable Stripping Device: Allows setup without manual adjustment, ensuring perfect stripping through precision cutting, way-back, and programmable cutting depth.
Bad Crimp Cutter: Cuts off bad crimps as detected by crimp force analysis, with programmable cutting options to minimize wire loss.

Technical Specifications:

Crimping force: Max 20 kN (4500 lbf)
Conductor cross-section for crimping: 0.05*–6mm² (AWG30–AWG10)
Adjustable crimp height: +5.00/-3.00mm (+0.19/-0.12 in.)
Adjustable stroke: 10–40mm (0.39–0.58 in.)
Electrical connection: 1 × 115V / 50/60Hz, 1 × 230V / 50/60Hz
Dimensions: 700 × 750 × 500mm (25.5 × 29.5 × 16.7 in.)
Weight: Approx. 110kg (243lb)
Cycle time: Approx. 0.3sec. (crimping)

Optional Stripping Device Specifications:

Stripping length: Max 12mm (0.47 in.)
Conductor cross-section for stripping: 0.05–4mm² (AWG30–AWG12)
Bad crimp cutting and precision cutting: 0.05–2.5mm² (AWG30–AWG14)
Cycle time: Approx. 0.9sec; including way-back, precision cutting
Compressed air connection: 5–6bar (72.25–116psi)

Optional Bad Crimp Cutter Specifications:

Bad crimp cutting through contact: Up to 2.5mm² (AWG14)
Bad crimp cutting through cable: Up to 6mm² (AWG10)

Note: Small cross sections require optimal conditions to monitor the crimp force. Sample processing is available for verification.

Catalog excerpts

This user-friendly bench top crimper offers fast cycle times and short conversion and setup times. The top quality of the processed conductor is guaranteed when this module is combined with two options: the programmable stripping device and the bad crimp cutter. Areas of application With the semi-automatic bt 712 crimper, it is no problem to do quality-monitored crimping of individual strands and multi-pole cables even with short stripping lengths. Commercially available crimp tools can be used for processing (contact feed from left and rear). Optimum operation The device is operated from the...

Open the catalog to page 2

Quality The integrated CFA/CFA+ crimp force analysis and bad crimp cutter monitor the crimping process to ensure a high-quality end product. Quality measurements can be made mandatory when production is set up. Production is not released until the measured values match the specified ones. Just one crimp is needed for referencing integrated crimp force analysis. This feature minimises the material used and the setup time. Komax bt 712 with programmable stripping device  Optional stripping device The programmable stripping device can be set up without any manual adjustment. All required processing...

Open the catalog to page 3

Technical data (standard) Crimping force * Small cross sections require optimal conditions to monitor the crimp force. If you are in doubt about your wires, we are happy to process samples of them. CR. bt 712 0333793 Version 3 Subject to changes. / fim Made in Switzerland Optional stripping device Stripping length Optional bad crimp cutter Bad crimp cutting through contact

Open the catalog to page 4

All Komax AG catalogs and technical brochures

Archived catalogs

Q1240 Strip monitoring
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list